ST10F269Z2Q6 STMicroelectronics, ST10F269Z2Q6 Datasheet - Page 6

• Manufacturer Part Number: ST10F269Z2Q6
• Description: MCU 16BIT 256K FLASH 144PQFP
• Manufacturer: STMicroelectronics
• Series: ST10r

Specifications of ST10F269Z2Q6

• Core Processor: ST10
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, SSC, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-QFP
• Controller Family/series: ST10
• No. Of I/o's: 111
• Ram Memory Size: 12KB
• Cpu Speed: 40MHz
• No. Of Timers: 5
• Embedded Interface Type: CAN, SSC, USART
• Rohs Compliant: Yes
• Processor Series: ST10F26x
• Core: ST10
• Data Bus Width: 16 bit
• Data Ram Size: 12 KB
• Interface Type: CAN, SSC, USART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 111
• Number Of Timers: 2 x 16 bit
• Operating Supply Voltage: 0.3 V to 4 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16 bit x 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 497-4833

ST10F269-T3
1 - INTRODUCTION
The
STMicroelectronics
single-chip CMOS microcontrollers. It combines
high CPU performance (up to 20 million
instructions per second) with high peripheral
functionality and enhanced I/O-capabilities. It also
provides on-chip high-speed single voltage Flash
memory, on-chip high-speed RAM, and clock
generation via PLL.
ST10F269-T3 is processed in 0.35µm CMOS
technology. The MCU core and the logic is
supplied with a 5V to 2.7V on chip voltage
regulator. The part is supplied with a single 5V
supply and I/Os work at 5V.
The device is upward compatible with the
ST10F168 device, with the following set of
differences:
– The Multiply/Accumulate unit is available as
– Flash control interface is now based on
Figure 1 : Logic Symbol
6/162
standard. This MAC unit adds powerful DSP
functions to the ST10 architecture, but maintains
full compatibility for existing code.
STMicroelectronics
stand-alone Flash memories, with an embedded
Erase/Program Controller. This completely
ST10F269-T3
ST10
is
XTAL1
XTAL2
RSTIN
RSTOUT
RPD
V
V
NMI
EA
READY
ALE
RD
WR/WRL
Port 5
16-bit
AREF
AGND
third
a
derivative
family
generation
of
of
V
DD
16-bit
the
of
DC1 DC2
ST10F269
– Two dedicated pins (DC1 and DC2) on the
– The A/D Converter characteristics are different
– The AC and DC parameters are adapted to the
– In order to reduce EMC, the rise/fall time and the
– The Real Time Clock functionality is added.
– The external interrupt sources can be selected
– The reset source is identified by a dedicated
frees up the CPU during programming or
erasing the Flash.
TPQFP-144 package are used for decoupling
the internally generated 2.7V core logic supply.
Do not connect these two pins to 5.0V
external supply. Instead, these pins should be
connected to a decoupling capacitor (ceramic
type, value ≥ 330 nF).
from previous ST10 derivatives ones. Refer to
Section 21.3.1 - A/D Converter Characteristics.
32MHz
characterization is performed with C
max on output pins. Refer to Section 21.3 DC
Characteristics.
sink/source capability of the drivers of the I/O
pads are programmable. Refer to Section 12.2 I/
O’s Special Features.
with the EXISEL register.
status bit in the WDTCON register.
V
SS
maximum
16-bit
16-bit
16-bit
15-bit
8-bit
8-bit
8-bit
Port 0
Port 1
Port 2
Port 3
Port 4
Port 6
Port 8
8-bit
Port 7
CPU
frequency.
L
= 50pF
The