C200H-OA223 Omron, C200H-OA223 Datasheet - Page 14

• Manufacturer Part Number: C200H-OA223
• Description: 8PT TRIAC
• Manufacturer: Omron

Specifications of C200H-OA223

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

xiv
Application Precautions
• Interlock circuits, limit circuits, and similar safety measures in external circuits
• Always use the power supply voltage specified in the operation manuals. An
• Take appropriate measures to ensure that the specified power with the rated
• Install external breakers and take other safety measures against short-circuit-
• Do not apply voltages to the Input Units in excess of the rated input voltage.
• Do not apply voltages or connect loads to the Output Units in excess of the
• Disconnect the functional ground terminal when performing withstand voltage
• Install the Unit properly as specified in the operation manual. Improper installa-
• Be sure that all the mounting screws, terminal screws, and cable connector
• Leave the label attached to the Unit when wiring. Removing the label may re-
• Remove the label after the completion of wiring to ensure proper heat dissipa-
• Use crimp terminals for wiring. Do not connect bare stranded wires directly to
• Double-check all the wiring before turning ON the power supply. Incorrect wir-
• Mount the Unit only after checking the terminal block completely.
• Be sure that the terminal blocks, Memory Units, expansion cables, and other
• Check the user program for proper execution before actually running it on the
• Confirm that no adverse effect will occur in the system before attempting any of
• Do not pull on the cables or bend the cables beyond their natural limit. Doing
• Do not place objects on top of the cables. Doing so may break the cables.
(i.e., not in the Programmable Controller) must be provided by the customer.
incorrect voltage may result in malfunction or burning.
voltage and frequency is supplied. Be particularly careful in places where the
power supply is unstable. An incorrect power supply may result in malfunction.
ing in external wiring. Insufficient safety measures against short-circuiting may
result in burning.
Excess voltages may result in burning.
maximum switching capacity. Excess voltage or loads may result in burning.
tests. Not disconnecting the functional ground terminal may result in burning.
tion of the Unit may result in malfunction.
screws are tightened to the torque specified in the relevant manuals. Incorrect
tightening torque may result in malfunction.
sult in malfunction.
tion. Leaving the label attached may result in malfunction.
terminals. Connection of bare stranded wires may result in burning.
ing may result in burning.
items with locking devices are properly locked into place. Improper locking
may result in malfunction.
Unit. Not checking the program may result in an unexpected operation.
the following. Not doing so may result in an unexpected operation.
either of these may break the cables.
• Changing the operating mode of the PC.
• Force-setting/force-resetting any bit in memory.
• Changing the present value of any word or any set value in memory.
5