S1D13700F01A100 Epson, S1D13700F01A100 Datasheet - Page 224

• Manufacturer Part Number: S1D13700F01A100
• Description: Display Drivers LCD CONTROLLER
• Manufacturer: Epson

Specifications of S1D13700F01A100

• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Package Type: TQFP
• Pin Count: 80
• Mounting: Surface Mount
• Operating Supply Voltage (min): 2.7V
• Lead Free Status / Rohs Status: Supplier Unconfirmed

MCF5307 Chip Select Configuration
3.5 Software
S1D13705F00A APPLICATION NOTES
(X27A-G-011-01)
Chip Selects 0 and 1 have programmable block sizes from 64K bytes through 2G bytes. However,
these chip selects would normally be needed to control system RAM and ROM. Therefore, one of
the IO chip selects CS2 through CS7 is required to address the entire address space of the
S1D13705. These IO chip selects have a fixed, 2M byte block size. In the example interface, chip
select 4 is used to control the S1D13705. The S1D13705 only uses a 128K byte block with its 80K
byte display buffer residing at the start of this 128K byte block and its internal registers occupying
the last 32 bytes of this block. This block of memory will be shadowed over the entire 2M byte
space. The CSBAR register should be set to the upper 8 bits of the desired base address.
The following options should be selected in the chip select mask registers (CSMR4/5):
• WP = 0
• AM = 0
• C/I = 1
• SC = 1
• SD = 0
• UC = 1
• UD = 0
• V = 1
The following options should be selected in the chip select control registers (CSCR4/5):
• WS0-3 = 0
• AA = 0
• PS (1:0) = 1:0 - memory port size is 16 bits
• BEM = 0
• BSTR = 0
• BSTW = 0
Test utilities and Windows
code is available for both the test utilities and the drivers.
The test utilities are configurable for different panel types using a program called 1375CFG, or by
directly modifying the source. The Windows
OEM for different panel types, resolutions and color depths only by modifying the source.
- disable write protect
- enable alternate bus master access to the S1D13705
- disable CPU space access to the S1D13705
- disable Supervisor Code space access to the S1D13705
- enable Supervisor Data space access to the S1D13705
- disable User Code space access to the S1D13705
- enable User Data space access to the S1D13705
- global enable (“Valid”) for the chip select
- no internal wait state setting
- no automatic acknowledgment
- Byte enable/write enable active on writes only
- disable burst reads
- disable burst writes
3: INTERFACING TO THE MOTOROLA MCF5307 “COLDFIRE” MICROPROCESSOR
®
CE v2.0 display drivers are available for the S1D13705. Full source
EPSON
®
CE v2.0 display drivers can be customized by the
5-23