MRF1535FNT1 Freescale Semiconductor, MRF1535FNT1 Datasheet - Page 11

• Manufacturer Part Number: MRF1535FNT1
• Description: IC MOSFET RF N-CHAN TO272-6
• Manufacturer: Freescale Semiconductor

Specifications of MRF1535FNT1

• Transistor Type: N-Channel
• Frequency: 520MHz
• Gain: 13.5dB
• Voltage - Rated: 40V
• Current Rating: 6A
• Current - Test: 500mA
• Voltage - Test: 12.5V
• Power - Output: 35W
• Package / Case: TO-272-6
• Channel Type: N
• Channel Mode: Enhancement
• Continuous Drain Current: 6A
• Drain Source Voltage (max): 40V
• Output Power (max): 35W
• Power Gain (typ)@vds: 13.5dB
• Frequency (min): 135MHz
• Frequency (max): 520MHz
• Package Type: TO-272 EP
• Pin Count: 6
• Drain Source Resistance (max): 700@5Vmohm
• Input Capacitance (typ)@vds: 250(Max)@12.5VpF
• Output Capacitance (typ)@vds: 150(Max)@12.5VpF
• Reverse Capacitance (typ): 20(Max)@12.5VpF
• Operating Temp Range: -65C to 200C
• Drain Efficiency (typ): 55%
• Mounting: Surface Mount
• Number Of Elements: 1
• Power Dissipation (max): 135000mW
• Vswr (max): 20
• Screening Level: Military
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Noise Figure: -
• Lead Free Status / Rohs Status: Compliant

RF Device Data
Freescale Semiconductor
AMPLIFIER DESIGN
bipolar transistors are suitable for this device. For examples
see Freescale Application Note AN721, “Impedance
Matching Networks Applied to RF Power Transistors.”
Large - signal impedances are provided, and will yield a good
first pass approximation.
unilateral. This coupled with the very high gain of this device
yields a device capable of self oscillation. Stability may be
achieved by techniques such as drain loading, input shunt
Impedance matching networks similar to those used with
Since RF power MOSFETs are triode devices, they are not
resistive loading, or output to input feedback. The RF test fix-
ture implements a parallel resistor and capacitor in series
with the gate, and has a load line selected for a higher effi-
ciency, lower gain, and more stable operating region.
S - parameters provides a useful tool for selection of loading
or feedback circuitry to assure stable operation. See Free-
scale Application Note AN215A, “RF Small - Signal Design
Using Two - Port Parameters” for a discussion of two port
network theory and stability.
Two - port stability analysis with this device’s
MRF1535NT1 MRF1535FNT1
11