LAN9118MT Standard Microsystems (SMSC), LAN9118MT Datasheet - Page 49

• Manufacturer Part Number: LAN9118MT
• Manufacturer: Standard Microsystems (SMSC)

High-Performance Single-Chip 10/100 Non-PCI Ethernet Controller
Datasheet
SMSC LAN9118
no energy is present on the line, the PHY is powered down, with th exception of the management
interface, the SQUELCH circuit and the ENERGYON logic. The ENERGYON logic is used to detect
the presence of valid energy from 100Base-TX, 10Base-T, or Auto-negotiation signals
In this mode, when the ENERGYON signal is low, the PHY is powered-down, and nothing is
transmitted. When energy is received - link pulses or packets - the ENERGYON signal goes high, and
the PHY powers-up. It automatically resets itself into the state it had prior to power-down, and asserts
the INT7.1 bit of the register defined in
ENERGYON interrupt is enabled, this event will cause an interrupt to the host. The first and possibly
the second packet to activate ENERGYON may be lost.
When 17.13 is low, energy detect power-down is disabled.
DATASHEET
Section 6.5.11, "Interrupt Source Flag," on page
49
Revision 1.0 (03-17-05)
146. If the