MC68306FC16B Freescale Semiconductor, MC68306FC16B Datasheet - Page 66

• Manufacturer Part Number: MC68306FC16B
• Description: IC MPU INTEGRATED 132-PQFP
• Manufacturer: Freescale Semiconductor

Specifications of MC68306FC16B

• Processor Type: M683xx 32-Bit
• Speed: 16MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 132-MQFP, 132-PQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -

STATE 1
STATE 2
STATE 3
STATE 4
STATE 5
STATE 6
STATE 7
3-34
is driven externally with an assertion delay defined by parameter #6.
a read cycle, UDS and/or LDS is also asserted at this time. Parameter
#9 defines the assertion delay for these signals. For a write cycle, the R/W
signal is driven low with a delay defined by parameter #20.
the high-impedance state with the data being written to the accessed
device (in a write cycle). Parameter #23 specifies the data assertion delay.
In a read cycle, no signal is altered in S3.
Entering the high clock period of S4, U D S /LDS is asserted
(during a write cycle) on the rising edge of the clock. As in S2 for a read
cycle, parameter #9 defines the assertion delay from the rising edge of S4
for U D S /LDS . In a read cycle, no signal is altered by the
processor during S4.
Until the falling edge of the clock at the end of S4 (beginning of S5), no
response from any external device except RESET is acknowledged by the
processor. If either DTACK or BERR is asserted before the falling edge of
S4 and satisfies the input setup time defined by parameter #47, the
processor enters S5 and the bus cycle continues. If either DTACK or BERR
is asserted but without meeting the setup time defined by parameter #47,
the processor may recognize the signal and continue the bus cycle; the
result is unpredictable. If neither DTACK nor BERR is asserted before the
next rise of clock, the bus cycle remains in S4, and wait states (complete
clock cycles) are inserted until one of the bus cycle terminations is met.
any signal.
set up relative to the falling edge (entering S7). Parameter #27 defines the
minimum period by which the data must precede the falling edge. For a
write operation, the processor changes no signal during S6.
On the falling edge of the clock entering S7, the processor latches data
and negates A S and UDS/ LDS during a read cycle. The hold
time for these strobes from this falling edge is specified by parameter #12.
The hold time for data relative to the negation of A S and U D S /LDS is
specified by parameter #29. For a write cycle, only AS and UDS /LDS ,
are negated; timing parameter #12 also applies.
Entering S1, a low period of the clock, the address of the accessed device
On the rising edge of S2, a high period of the clock, AS is asserted. During
On the falling edge of the clock entering S3, the data bus is driven out of
S5 is a low period of the clock, during which the processor does not alter
S6 is a high period of the clock, during which data for a read operation is
Freescale Semiconductor, Inc.
For More Information On This Product,
MC68306 USER'S MANUAL
Go to: www.freescale.com
MOTOROLA