KSZ8893MBL Micrel Inc, KSZ8893MBL Datasheet - Page 94

• Manufacturer Part Number: KSZ8893MBL
• Description: IC MANAGED SW 10/100 100-LFBGA
• Manufacturer: Micrel Inc

Specifications of KSZ8893MBL

• Controller Type: Ethernet Switch Controller
• Interface: MII, RMII, SNI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-LFBGA
• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1603 - EVAL KIT EXPERIMENTAL KSZ8893MQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-3090

VLAN Table
The KSZ8893MQL/MBL uses the VLAN table to perform look ups. If 802.1Q VLAN mode is enabled (register 5,
bit 7 = 1), this table will be used to retrieve the VLAN information that is associated with the ingress packet. This
information includes FID (filter ID), VID (VLAN ID), and VLAN membership as described in the following table.
If 802.1Q VLAN mode is enabled, KSZ8893MQL/MBL will assign a VID to every ingress packet. If the packet is
untagged or tagged with a null VID, the packet is assigned with the default port VID of the ingress port. If the
packet is tagged with non null VID, the VID in the tag will be used. The look up process will start from the VLAN
table look up. If the VID is not valid, the packet will be dropped and no address learning will take place. If the VID
is valid, the FID is retrieved. The FID+DA and FID+SA lookups are performed. The FID+DA look up determines
the forwarding ports. If FID+DA fails, the packet will be broadcast to all the members (excluding the ingress port)
of the VLAN. If FID+SA fails, the FID+SA will be learned.
December 2007
2. Static Address Table Write (Write the 8
Bit
19
18-16
15-12
11-0
Examples:
1. VLAN Table Read (read the 3
2. VLAN Table Write (write the 7
Then,
Write to reg. 124 (0x7C), static table bits [57:56]
Write to reg. 125 (0x7D), static table bits [55:48]
Write to reg. 126 (0x7E), static table bits [47:40]
Write to reg. 127 (0x7F), static table bits [39:32]
Write to reg. 128 (0x80), static table bits [31:24]
Write to reg. 129 (0x81), static table bits [23:16]
Write to reg. 130 (0x82), static table bits [15:8]
Write to reg. 131 (0x83), static table bits [7:0]
Write to reg. 121 (0x79) with 0x00
Write to reg. 122 (0x7A) with 0x07
Write to reg. 121 (0x79) with 0x14
Write to reg. 122 (0x7A) with 0x02
Read reg. 129 (0x81), VLAN table bits [19:16]
Read reg. 130 (0x82), VLAN table bits [15:8]
Read reg. 131 (0x83), VLAN table bits [7:0]
Name
Valid
Membership
FID
VID
Table 17. Format of Static VLAN Table (16 Entries)
R/W
R/W
R/W
R/W
R/W
rd
Description
= 1, entry is valid
= 0, entry is invalid
Specify which ports are members of the VLAN. If
a DA lookup fails (no match in both static and
dynamic tables), the packet associated with this
VLAN will be forwarded to ports specified in this
field. For example, 101 means port 3 and 1 are in
this VLAN.
Filter ID. KSZ8893MQL/MBL supports 16 active
VLANs represented by these four bit fields. FID
is the mapped ID. If 802.1Q VLAN is enabled,
the look up will be based on FID+DA and
FID+SA.
IEEE 802.1Q 12 bits VLAN ID
th
entry)
entry)
th
Entry)
94
// Write static table selected
// Trigger the write operation
// Read VLAN table selected
// Trigger the read operation
Default
1
111
0x0
0x001
M9999-121007-1.5