ICS1893YI-10LFT IDT, Integrated Device Technology Inc, ICS1893YI-10LFT Datasheet - Page 10

• Manufacturer Part Number: ICS1893YI-10LFT
• Description: PHYCEIVER LOW PWR 3.3V 64-TQFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Series: PHYceiver™r
• Type: PHY Transceiverr

Specifications of ICS1893YI-10LFT

• Protocol: MII
• Voltage - Supply: 3.14 V ~ 3.47 V
• Mounting Type: Surface Mount
• Package / Case: 64-TQFP, 64-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Drivers/receivers: -
• Other names: 1893YI-10LFT

ICS1893Y-10 Rev F 1/20/04
•
This release of this document, Rev C, is dated May 22, 2000. Change bars indicate where all changes
are made. (For an explanation of change bars, see the Change Bar note on this page.) The following list
also indicates where changes occur.
– Table of Contents reflect page renumbering.
–
–
–
–
–
– A new figure,
–
–
–
– In the following areas, ICS1894 changes to ICS1893Y-10:
– In the following sections, pin 54 changes from VDD_IO to VDD:
–
–
–
–
– A new figure,
ICS1893Y-10 Data Sheet - Release
Table 3-1
Section 5.5, “Twisted-Pair Interface”
Section 5.5.1, “Twisted-Pair Transmitter Interface”
Interface”
Section 6.6, “Clock Reference Interface”
ICS1893Y-10 does not work with a crystal. (Section 6.6.1 and Section 6.6.2 are deleted.)
Section 5.8, “Status Interface”
Table 7-9
Section 7.5.2, “Manufacturer's Model Number (bits 3.9:4)”
Table 7-10
Table 8-4
Table 8-7
Section 8.3.6, “Ground and Power Pins”
Section 9.3, “Recommended Component Values”
•
•
•
•
•
•
•
Section 7.13.1, “Remote Jabber Detect (bit 18.15)”
Table 8-5
Table 8-6
Table 8-8
Section 8.1, “ICS1893Y-10 Pin Diagram”
Section 8.2, “ICS1893Y-10 Pin Listings”
Section 8.3.6, “Ground and Power Pins”
value xxx changes from 000011b to 000100b
value changes from F420 to F441.
text changes for the REF_IN and REF_OUT pin descriptions.
text changes for the RXTRI pin descriptions.
are two new sections with two new figures.
value changes from 0000 to 0001.
RXCLK pin description.
RXCLK pin description.
NC pin description.
Figure
Figure
5-4, follows
9-1, follows
Copyright © 2004, Integrated Circuit Systems, Inc.
has two new notes, Notes 5 and 6.
Section 5.8, “Status
Section 9.3, “Recommended Component
All rights reserved.
text changes.
adds the VSS ground pin, pin 22.
reflects deletion of references to crystal oscillator, as the
10
text changes.
and
Interface”.
Section 5.5.2, “Twisted-Pair Receiver
text changes.
Values”.
Revision History
January, 2004