PIC12CE67 Microchip Technology, PIC12CE67 Datasheet - Page 42

• Manufacturer Part Number: PIC12CE67
• Description: 8-Pin/ 8-Bit CMOS Microcontroller with A/D Converter and EEPROM Data Memory
• Manufacturer: Microchip Technology

PIC12CE67X
8.4
Example 8-2 show how to perform an A/D conversion.
The GP pins are configured as analog inputs. The ana-
log reference (V
rupt is enabled, and the A/D conversion clock is F
The conversion is performed on the GP0 channel.
EXAMPLE 8-2:
;
;
;
;
DS40181B-page 42
Note:
Ensure that the required sampling time for the selected input channel has elapsed.
Then the conversion may be started.
BSF
CLRF
BSF
BCF
MOVLW
MOVWF
BCF
BSF
BSF
BSF
:
:
A/D Conversions
The GO/DONE bit should NOT be set in
the same instruction that turns on the A/D.
STATUS, RP0
ADCON1
PIE1,
STATUS, RP0
0xC1
ADCON0
PIR1,
INTCON, PEIE
INTCON, GIE
ADCON0, GO
REF
) is the device V
DOING AN A/D CONVERSION
ADIE
ADIF
DD
. The A/D inter-
; Select Page 1
; Configure A/D inputs
; Enable A/D interrupts
; Select Page 0
; RC Clock, A/D is on, Channel 0 is selected
;
; Clear A/D interrupt flag bit
; Enable peripheral interrupts
; Enable all interrupts
; Start A/D Conversion
; The ADIF bit will be set and the GO/DONE bit
;
is cleared upon completion of the A/D Conversion.
Preliminary
RC
.
Clearing the GO/DONE bit during a conversion will
abort the current conversion. The ADRES register will
NOT be updated with the partially completed A/D con-
version sample. That is, the ADRES register will con-
tinue to contain the value of the last completed
conversion (or the last value written to the ADRES reg-
ister). After the A/D conversion is aborted, a 2T
is required before the next acquisition is started. After
this 2T
on the selected channel.
AD
wait, an acquisition is automatically started
1998 Microchip Technology Inc.
AD
wait