peb20320 Infineon Technologies Corporation, peb20320 Datasheet - Page 61

• Manufacturer Part Number: peb20320
• Description: Multichannel Network Interface Controller For Hdlc
• Manufacturer: Infineon Technologies Corporation

Time Slot Oriented Protocol (TMA)
Normal operation, handling of frame end (FE) indication and hold (H) indication.
Note: 1. FNUM must be set to zero.
User’s Manual
2. TC = FF
3. After sending the FNUM2 – 1 IC characters the device starts polling the hold bit
in the transmit descriptor once for each further sent IC character. It also rereads
the pointer to the next transmit descriptor once with each poll of the hold
indication. The pointer to the next transmit descriptor can be changed while
HOLD = 1 is set. The value of the pointer, (read in the poll where HOLD = 0) is
used as the next descriptor address. If more than 6 IC characters will be sent,
the use of the Transmit Hold (TH) should be considered as an alternative to
using the descriptor hold bit. See Chapter 5.3.2.
the programmed flag with TMA and FA = 1
H
for TMA and FA = 0
61
Functional Description
PEB 20320
01.2000