ST7FLITE29 STMICROELECTRONICS [STMicroelectronics], ST7FLITE29 Datasheet - Page 43

• Manufacturer Part Number: ST7FLITE29
• Description: 8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, DATA EEPROM, ADC, TIMERS, SPI
• Manufacturer: STMICROELECTRONICS [STMicroelectronics]

POWER SAVING MODES (Cont’d)
Similarities with Halt mode
The following AWUFH mode behaviour is the
same as normal Halt mode:
– The MCU can exit AWUFH mode by means of
– When entering AWUFH mode, the I bit in the CC
Figure 29. AWUF Halt Timing Diagram
AWUFH interrupt
f
any interrupt with exit from Halt capability or a re-
set (see
register is forced to 0 to enable interrupts. There-
fore, if an interrupt is pending, the MCU wakes
up immediately.
f
AWU_RC
CPU
Section 9.4 HALT
RUN MODE
MODE).
HALT MODE
t
AWU
– In AWUFH mode, the main oscillator is turned off
– The compatibility of Watchdog operation with
causing all internal processing to be stopped, in-
cluding the operation of the on-chip peripherals.
None of the peripherals are clocked except those
which get their clock supply from another clock
generator (such as an external or auxiliary oscil-
lator like the AWU oscillator).
AWUFH mode is configured by the WDGHALT
option bit in the option byte. Depending on this
setting, the HALT instruction when executed
while the Watchdog system is enabled, can gen-
erate a Watchdog RESET.
256 OR 4096 t
CPU
RUN MODE
Clear
by software
ST7LITE2
43/131
1