DS21448A1 Maxim Integrated, DS21448A1 Datasheet - Page 20

• Manufacturer Part Number: DS21448A1
• Description: Network Controller & Processor ICs 3.3V E1/T1/J1 Quad Interface
• Manufacturer: Maxim Integrated

Specifications of DS21448A1

• Part # Aliases: 90-21448-0A1

CCR2 (01H): Common Control Register 2
NAME
RLPIN
RHBE
RCES
SCLD
CLDS
THBE
TCES
(MSB)
RLPIN
—
POSITION
CCR2.7
CCR2.6
CCR2.5
CCR2.4
CCR2.3
CCR2.2
CCR2.1
CCR2.0
—
RCL/LOTC Pin Function Select. Forced to logic 0 in hardware mode.
0 = toggles high during a receive-carrier loss condition
1 = toggles high if TCLK does not transition for at least 5µs
Not Assigned. Should be set to 0 when written to.
Short Circuit-Limit Disable (ETS = 0). Controls the 50mA (RMS) current limiter.
0 = enable 50mA current limiter
1 = disable 50mA current limiter
Custom Line-Driver Select. Setting this bit to 1 redefines the operation of the transmit line
driver. When this bit is set to 1 and CCR4.5 = CCR4.6 = CCR4.7 = 0, the device generates a
square wave at the TTIP and TRING outputs instead of a normal waveform. When this bit is
set to 1 and CCR4.5 = CCR4.6 = CCR4.7 ≠ 0, the device forces TTIP and TRING outputs to
become open-drain drivers instead of their normal push-pull operation. This bit should be set
to 0 for normal operation of the device. Contact the factory for more details about how to use
this bit.
Receive HDB3/B8ZS Enable
0 = enable HDB3 (E1)/B8ZS (T1)
1 = disable HDB3 (E1)/B8ZS (T1)
Transmit HDB3/B8ZS Enable
0 = enable HDB3 (E1)/B8ZS (T1)
1 = disable HDB3 (E1)/B8ZS (T1)
Transmit Clock-Edge Select. Selects which TCLK edge to sample TPOS and TNEG.
0 = sample TPOS and TNEG on falling edge of TCLK
1 = sample TPOS and TNEG on rising edge of TCLK
Receive Clock-Edge Select. Selects which RCLK edge to update RPOS and RNEG.
0 = update RPOS and RNEG on rising edge of RCLK
1 = update RPOS and RNEG on falling edge of RCLK
SCLD
CLDS
20 of 60
RHBE
FUNCTION
THBE
TCES
RCES
(LSB)