PIC24HJ16GP304-I/ML Microchip Technology, PIC24HJ16GP304-I/ML Datasheet - Page 258

• Manufacturer Part Number: PIC24HJ16GP304-I/ML
• Description: IC PIC MCU FLASH 16K 44QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ16GP304-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 16KB (5.5K x 24)
• Package / Case: 44-QFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 35
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 13x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 13-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24HJ32GP202/204 AND PIC24HJ16GP304
TABLE 24-1:
DS70289G-page 258
Section 15.0 “Inter-Integrated
Circuit (I
Section 16.0 “Universal
Asynchronous Receiver Transmitter
(UART)”
Section 17.0 “10-bit/12-bit Analog-
to-Digital Converter (ADC)”
2
C™)”
Section Name
MAJOR SECTION UPDATES (CONTINUED)
Removed the following sections, which are now available in the related
section of the dsPIC33F/PIC24H Family Reference Manual:
• 15.3 “I
• 15.4 “Baud Rate Generator” (retained Figure 15-1: I
• 15.5 “I
• 15.6 “Slave Address Masking”
• 15.7 “IPMI Support”
• 15.8 “General Call Address Support”
• 15.9 “Automatic Clock Stretch”
• 15.10 “Software Controlled Clock Stretching (STREN = 1)”
• 15.11 “Slope Control”
• 15.12 “Clock Arbitration”
• 15.13 “Multi-Master Communication, Bus Collision, and Bus Arbitration”
• 15.14 “Peripheral Pin Select Limitations”
Removed the following sections, which are now available in the related
section of the dsPIC33F/PIC24H Family Reference Manual:
• 16.1 “UART Baud Rate Generator”
• 16.2 “Transmitting in 8-bit Data Mode”
• 16.3 “Transmitting in 9-bit Data Mode”
• 16.4 “Break and Sync Transmit Sequence”
• 16.5 “Receiving in 8-bit or 9-bit Data Mode”
• 16.6 “Flow Control Using UxCTS and UxRTS Pins”
• 16.7 “Infrared Support”
Removed IrDA references and Note 1, and updated the bit and bit value
descriptions for UTXINV (UxSTA<14>) in the UARTx Status and Control
Register (see Register 16-2).
Removed Equation 17-1: ADC Conversion Clock Period and Figure 17-2:
ADC Transfer Function (10-Bit Example).
Added ADC1 Module Block Diagram for PIC24HFJ16GP304 and
PIC24HJ32GP204 Devices (Figure 17-1) and ADC1 Module Block Diagram
FOR PIC24HJ32GP202 Devices (Figure 17-2).
Added Note 2 to Figure 17-3: ADC Conversion Clock Period Block Diagram.
Added device-specific information to Note 1 in the ADC1 Input Scan Select
Register Low (see Register 17-6), and updated the default bit value for bits
12-10 (CSS12-CSS10) from U-0 to R/W-0.
Added device-specific information to Note 1 in the ADC1 Port Configuration
Register Low (see Register 17-7), and updated the default bit value for bits
12-10 (PCFG12-PCFG10) from U-0 to R/W-0.
2
2
C Interrupts”
C Module Addresses”
Update Description
© 2011 Microchip Technology Inc.
2
C Block Diagram)