DSPIC30F5013-20I/PT Microchip Technology, DSPIC30F5013-20I/PT Datasheet - Page 156

• Manufacturer Part Number: DSPIC30F5013-20I/PT
• Description: IC DSPIC MCU/DSP 66K 80TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F5013-20I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, I²S, LVD, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 66KB (22K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Core Frequency: 40MHz
• Core Supply Voltage: 5.5V
• Embedded Interface Type: CAN, I2C, SPI, UART
• No. Of I/o's: 68
• Flash Memory Size: 66KB
• Supply Voltage Range: 2.5V To 5.5V
• Package: 80TQFP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 68
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 16-chx12-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM300024 - KIT DEMO DSPICDEM 1.1XLT80PT3 - SOCKET TRAN ICE 80MQFP/TQFPAC164320 - MODULE SKT MPLAB PM3 80TQFPDM300004-2 - BOARD DEMO DSPICDEM.NET 2DM300004-1 - BOARD DEMO DSPICDEM.NET 1AC30F007 - MODULE SKT FOR DSPIC30F 80TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: DSPIC30F501320IPT

dsPIC30F5011/5013
All instructions are a single word, except for certain
double word instructions, which were made double
word instructions so that all the required information is
available in these 48 bits. In the second word, the 8
Most Significant bits are ‘0’s. If this second word is
executed as an instruction (by itself), it will execute as
a NOP.
Most single-word instructions are executed in a single
instruction cycle, unless a conditional test is true or the
program counter is changed as a result of the
instruction. In these cases, the execution takes two
instruction cycles with the additional instruction
cycle(s) executed as a NOP. Notable exceptions are the
BRA
CALL/GOTO,
TABLE 21-1:
DS70116H-page 156
#text
(text)
[text]
{ }
<n:m>
.b
.d
.S
.w
Acc
AWB
bit4
C, DC, N, OV, Z
Expr
f
lit1
lit4
lit5
lit8
lit10
lit14
lit16
lit23
None
OA, OB, SA, SB
PC
Slit10
Slit16
Slit6
(unconditional/computed
Field
all
SYMBOLS USED IN OPCODE DESCRIPTIONS
table
reads
Means literal defined by “text”
Means “content of text”
Means “the location addressed by text”
Optional field or operation
Register bit field
Byte mode selection
Double Word mode selection
Shadow register select
Word mode selection (default)
One of two accumulators {A, B}
Accumulator write back destination address register ∈ {W13, [W13]+=2}
4-bit bit selection field (used in word addressed instructions) ∈ {0...15}
MCU status bits: Carry, Digit Carry, Negative, Overflow, Sticky Zero
Absolute address, label or expression (resolved by the linker)
File register address ∈ {0x0000...0x1FFF}
1-bit unsigned literal ∈ {0,1}
4-bit unsigned literal ∈ {0...15}
5-bit unsigned literal ∈ {0...31}
8-bit unsigned literal ∈ {0...255}
10-bit unsigned literal ∈ {0...255} for Byte mode, {0:1023} for Word mode
14-bit unsigned literal ∈ {0...16384}
16-bit unsigned literal ∈ {0...65535}
23-bit unsigned literal ∈ {0...8388608}; LSB must be 0
Field does not require an entry, may be blank
DSP status bits: AccA Overflow, AccB Overflow, AccA Saturate, AccB Saturate
Program Counter
10-bit signed literal ∈ {-512...511}
16-bit signed literal ∈ {-32768...32767}
6-bit signed literal ∈ {-16...16}
branch),
and
writes,
indirect
and
RETURN/RETFIE instructions, which are single-word
instructions but take two or three cycles. Certain
instructions that involve skipping over the subsequent
instruction require either two or three cycles if the skip
is performed, depending on whether the instruction
being skipped is a single-word or two-word instruction.
Moreover, double word moves require two cycles. The
double word instructions execute in two instruction
cycles.
Note:
Description
For more details on the instruction set,
refer to the “dsPIC30F/33F Programmer’s
Reference Manual” (DS70157).
© 2008 Microchip Technology Inc.