ST10F269Z2Q3 STMicroelectronics, ST10F269Z2Q3 Datasheet - Page 29

• Manufacturer Part Number: ST10F269Z2Q3
• Description: IC FLASH MEM 256KBIT 144-PQFP
• Manufacturer: STMicroelectronics
• Series: ST10r

Specifications of ST10F269Z2Q3

• Core Processor: ST10
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, SSC, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 144-QFP
• Processor Series: ST10F26x
• Core: ST10
• Data Bus Width: 16 bit
• Data Ram Size: 12 KB
• Interface Type: CAN, SSC, USART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 111
• Number Of Timers: 2 x 16 bit
• Operating Supply Voltage: 0.3 V to 4 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16 bit x 10 bit
• Cpu Family: ST10
• Device Core Size: 16b
• Frequency (max): 40MHz
• Total Internal Ram Size: 12KB
• # I/os (max): 111
• Number Of Timers - General Purpose: 5
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• Instruction Set Architecture: CISC/RISC
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: PQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-2042

ST10F269
EXTS
MOV
Data_Polling:
EXTS
MOV
MOV
XOR
JNB
JNB
EXTS
MOV
XOR
JNB
Prog_Error:
MOV
EXTS
MOV
...
...
...
Prog_OK:
....
....
R11, #1
[R12], R13
R11, #1
R7, [R12]
R6, R7
R7, R13
R7.7, Prog_OK
R6.5, Data_Polling
R11, #1
R7, [R12]
R7, R13
R7.7, Prog_OK
R7, #0F0h
R11, #1
[R12], R7
;R12 contains the segment offset address to be
;programmed
;R13 contains the data to be programmed
;use EXTended addressing for next MOV instruction
;command cycle 4: the EPC starts execution of
;Programming Command
;use EXTended addressing for next MOV instruction
;read Flash Status register (FSB) in R7
;save it in R6 register
;Check if FSB.7 = Data.7 (i.e. R7.7 = R13.7)
;Check if FSB.5 = 1 (Programming Error)
;Programming Error: verify is Flash programmed
;data is OK
;use EXTended addressing for next MOV instruction
;read Flash Status register (FSB) in R7
;Check if FSB.7 = Data.7
;Programming failed: Flash remains in Write
;Operation.
;To go back to normal Read operations, a Read/Reset
;command
;must be performed
;load register R7 with Read/Reset command
;use EXTended addressing for next MOV instruction
;address is don’t care for Read/Reset command
;here place specific Error handling code
;When programming operation finished succesfully,
;Flash is set back automatically to normal Read Mode
5 - INTERNAL FLASH MEMORY
29/184