MC9S12C32MFUE25 Freescale Semiconductor, MC9S12C32MFUE25 Datasheet - Page 73

• Manufacturer Part Number: MC9S12C32MFUE25
• Description: IC MCU 32K FLASH 25MHZ 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12C32MFUE25

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 60
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 80-QFP
• Processor Series: S12C
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: CAN/SCI/SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 60
• Number Of Timers: 8
• Operating Supply Voltage: 3.3 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: M68EVB912C32EE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• For Use With: CML12C32SLK - KIT STUDENT LEARNING 16BIT HCS12
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Chapter 2
Port Integration Module (PIM9C32) Block Description
2.1
The Port Integration Module establishes the interface between the peripheral modules and the I/O pins for
all ports.
This chapter covers:
The following I/O pin configurations can be selected:
The implementation of the Port Integration Module is device dependent.
2.1.1
A standard port has the following minimum features:
Optional features:
Freescale Semiconductor
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Port A, B, and E related to the core logic and the multiplexed bus interface
Port T connected to the TIM module (PWM module can be routed to port T as well)
Port S connected to the SCI module
Port M associated to the MSCAN and SPI module
Port P connected to the PWM module, external interrupt sources available
Port J pins can be used as external interrupt sources and standard I/O’s
Available on all I/O pins:
— Input/output selection
— Drive strength reduction
— Enable and select of pull resistors
Available on all Port P and Port J pins:
— Interrupt enable and status flags
Input/output selection
5-V output drive with two selectable drive strength
5-V digital and analog input
Input with selectable pull-up or pull-down device
Open drain for wired-OR connections
Interrupt inputs with glitch filtering
Introduction
Features
MC9S12C-Family / MC9S12GC-Family
Rev 01.24
73