ATTINY2313A-SUR Atmel, ATTINY2313A-SUR Datasheet - Page 110

• Manufacturer Part Number: ATTINY2313A-SUR
• Description: MCU AVR 2KB FLASH 20MHZ 20SOIC
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY2313A-SUR

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 18
• Program Memory Size: 2KB (1K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -

12.11 Register Description
12.11.1
110
ATtiny2313A/4313
TCCR1A – Timer/Counter1 Control Register A
• Bit 7:6 – COM1A1:0: Compare Output Mode for Channel A
• Bit 5:4 – COM1B1:0: Compare Output Mode for Channel B
The COM1A1:0 and COM1B1:0 control the Output Compare pins (OC1A and OC1B respec-
tively) behavior. If one or both of the COM1A1:0 bits are written to one, the OC1A output
overrides the normal port functionality of the I/O pin it is connected to. If one or both of the
COM1B1:0 bit are written to one, the OC1B output overrides the normal port functionality of the
I/O pin it is connected to. However, note that the Data Direction Register (DDR) bit correspond-
ing to the OC1A or OC1B pin must be set in order to enable the output driver.
When the OC1A or OC1B is connected to the pin, the function of the COM1x1:0 bits is depen-
dent of the WGM13:0 bits setting.
WGM13:0 bits are set to a Normal or a CTC mode (non-PWM).
Table 12-2.
Table 12-3
PWM mode.
Table 12-3.
Note:
Bit
0x2F (0x4F)
Read/Write
Initial Value
COM1A1/COM1B1
COM1A1/COM1B1
1. A special case occurs when OCR1A/OCR1B equals TOP and COM1A1/COM1B1 is set. In
0
0
1
1
0
0
1
1
this case the compare match is ignored, but the set or clear is done at TOP.
Mode” on page 98.
shows the COM1x1:0 bit functionality when the WGM13:0 bits are set to the fast
COM1A1
R/W
Compare Output Mode, non-PWM
Compare Output Mode, Fast PWM
7
0
COM1A0
COM1A0/COM1B0
COM1A0/COM1B0
R/W
6
0
for more details.
0
1
0
1
0
1
0
1
COM1B1
R/W
5
0
Table 12-2
COM1B0
R/W
4
0
Description
Normal port operation, OC1A/OC1B
disconnected.
Toggle OC1A/OC1B on Compare Match.
Clear OC1A/OC1B on Compare Match (Set
output to low level).
Set OC1A/OC1B on Compare Match (Set output
to high level).
Description
Normal port operation, OC1A/OC1B
disconnected.
WGM13=0: Normal port operation, OC1A/OC1B
disconnected.
WGM13=1: Toggle OC1A on Compare Match,
OC1B reserved.
Clear OC1A/OC1B on Compare Match, set
OC1A/OC1B at TOP
Set OC1A/OC1B on Compare Match, clear
OC1A/OC1B at TOP
shows the COM1x1:0 bit functionality when the
(1)
R
3
–
0
R
2
–
0
WGM11
R/W
1
0
WGM10
R/W
0
0
See “Fast PWM
TCCR1A
8246A–AVR–11/09