R5F211B1SP#U0 Renesas Electronics America, R5F211B1SP#U0 Datasheet - Page 18

• Manufacturer Part Number: R5F211B1SP#U0
• Description: IC R8C MCU FLASH 4K 20SSOP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/R8C/Tiny/1Br

Specifications of R5F211B1SP#U0

• Core Processor: R8C
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SIO, SSU, UART/USART
• Peripherals: LED, POR, Voltage Detect, WDT
• Number Of I /o: 13
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 20-SSOP
• For Use With: R0K5211B4S001BE - KIT STARTER FOR R8C/18191A1BR0K5211B4S000BE - KIT DEV EVALUATION R8C/1BR0E521174CPE10 - EMULATOR COMPACT R8C/18/19/1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/1A Group, R8C/1B Group
Rev.1.40
REJ03B0144-0140
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.8.1
2.8.2
2.8.3
2.8.4
2.8.5
2.8.6
R0 is a 16-bit register for transfer, arithmetic, and logic operations. The same applies to R1 to R3. R0
can be split into high-order bits (R0H) and low-order bits (R0L) to be used separately as 8-bit data
registers. R1H and R1L are analogous to R0H and R0L. R2 can be combined with R0 and used as a 32-
bit data register (R2R0). R3R1 is analogous to R2R0.
A0 is a 16-bit register for address register indirect addressing and address register relative addressing.
It is also used for transfer and arithmetic and logic operations. A1 is analogous to A0. A1 can be
combined with A0 and used as a 32-bit address register (A1A0).
FB is a 16-bit register for FB relative addressing.
INTB is a 20-bit register that indicates the start address of an interrupt vector table.
PC is 20 bits wide indicates the address of the next instruction to be executed.
The stack pointer (SP), USP, and ISP, are each 16 bits wide. The U flag of FLG is used to switch
between USP and ISP.
SB is a 16-bit register for SB relative addressing.
FLG is an 11-bit register indicating the CPU state.
The C flag retains a carry, borrow, or shift-out bits that have been generated by the arithmetic and
logic unit.
The D flag is for debugging only. Set it to 0.
The Z flag is set to 1 when an arithmetic operation results in 0; otherwise to 0.
The S flag is set to 1 when an arithmetic operation results in a negative value; otherwise to 0.
Register bank 0 is selected when the B flag is 0. Register bank 1 is selected when this flag is set to 1.
The O flag is set to 1 when the operation results in an overflow; otherwise to 0.
Data Registers (R0, R1, R2, and R3)
Address Registers (A0 and A1)
Frame Base Register (FB)
Interrupt Table Register (INTB)
Program Counter (PC)
User Stack Pointer (USP) and Interrupt Stack Pointer (ISP)
Static Base Register (SB)
Flag Register (FLG)
Dec 08, 2006
Carry Flag (C)
Debug Flag (D)
Zero Flag (Z)
Sign Flag (S)
Register Bank Select Flag (B)
Overflow Flag (O)
Page 16 of 45
2. Central Processing Unit (CPU)