MC908MR8MPE Freescale Semiconductor, MC908MR8MPE Datasheet - Page 129

• Manufacturer Part Number: MC908MR8MPE
• Description: IC MCU 8BIT 8K FLASH 28-PDIP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908MR8MPE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 12
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-DIP (0.600", 15.24mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

8.6.2 PLL Bandwidth Control Register
MC68HC908MR8 — Rev 4.1
Freescale Semiconductor
The PLL bandwidth control register:
AUTO — Automatic Bandwidth Control Bit
LOCK — Lock Indicator Bit
Reset:
dress:
Read:
Write:
Ad-
•
•
•
•
This read/write bit selects automatic or manual bandwidth control.
When initializing the PLL for manual operation (AUTO = 0), clear the
ACQ bit before turning on the PLL. Reset clears the AUTO bit.
When the AUTO bit is set, LOCK is a read-only bit that becomes set
when the VCO clock, CGMVCLK, is locked (running at the
programmed frequency). When the AUTO bit is clear, LOCK reads as
logic 0 and has no meaning. Reset clears the LOCK bit.
1 = Automatic bandwidth control
0 = Manual bandwidth control
1 = VCO frequency correct or locked
0 = VCO frequency incorrect or unlocked
Selects automatic or manual (software-controlled) bandwidth
control mode
Indicates when the PLL is locked
In automatic bandwidth control mode, indicates when the PLL is in
acquisition or tracking mode
In manual operation, forces the PLL into acquisition or tracking
mode
$005D
Figure 8-6. PLL Bandwidth Control Register (PBWC)
AUTO
Bit 7
R
0
Clock Generator Module (CGM)
= Reserved
LOCK
R
6
0
ACQ
5
0
XLD
4
0
R
3
0
0
Clock Generator Module (CGM)
R
2
0
0
CGM Registers
R
1
0
0
Technical Data
Bit 0
R
0
0
129