HD64F3672FY Renesas Electronics America, HD64F3672FY Datasheet - Page 323

• Manufacturer Part Number: HD64F3672FY
• Description: IC H8 MCU FLASH 16K 48QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3672FY

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SCI
• Peripherals: PWM, WDT
• Number Of I /o: 26
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 48-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Item
Preface
Section 1 Overview
Figure 1.1 Internal Block
Diagram
Figure 1.2 Pin
Arrangement (FP-64E)
Figure 1.3 Pin
Arrangement (FP-48F, FP-
48B)
1.4 Pin Functions
Table 1.1 Pin Functions
Main Revisions and Additions in this Edition
Page
vi, vii
2 to 4
6
Revisions (See Manual for Details)
When using the on-chip emulator (E7, E8) for H8/3672
program development and debugging, the following
restrictions must be noted.
1. The NMI pin is reserved for the E7 or E8, and cannot be
2. Area H'4000 to H'4FFF is used by the E7 or E8, and is not
4. When the E7 or E8 is used, address breaks can be set as
5. When the E7 or E8 is used, NMI is an input/output pin
Note has been deleted.
Note: * Can also be used for the E7 or E8 emulator.
Type
E10T
used.
available to the user.
either available to the user or for use by the E7 or E8. If
address breaks are set as being used by the E7 or E8, the
address break control registers must not be accessed.
(open-drain in output mode).
Functions
Interface pin for the E10T, E7, or E8
emulator
Rev.4.00 Nov. 02, 2005 Page 297 of 304
REJ09B0143-0400