HD6417760BP200DQ Renesas Electronics America, HD6417760BP200DQ Datasheet - Page 1039

• Manufacturer Part Number: HD6417760BP200DQ
• Description: IC SUPERH MPU ROMLESS 256BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417760BP200DQ

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

Bit
4
3
2
1
0
Bit
Name
CWRE
DTBUSY
DTBUSY_
TU
—
REQ
Initial
Value
0
0
—
0
0
R/W
R
R
R
R
R
Description
Command Register Write Enable
Indicates whether the CMDR command is being
transmitted or has been transmitted.
0: The CMDR command has been transmitted, or the
1: The CMDR command is waiting for transmission or
Data Busy
Indicates command execution status. Indicates that the
card is in the busy state after the command sequence
of a command without data transfer which includes the
busy state in the response, or a command with write
data has been ended.
0: Idle state waiting for a command, or command
1: Card is in the data busy state after command
Data Busy Pin Status
Indicates the MCDAT pin level. By reading this bit, the
MCDAT level can be monitored.
0: A low level is input to the MCDAT pin.
1: A high level is input to the MCDAT pin.
Reserved
This bit is always read as 0. The write value should
always be 0.
Interrupt Request
Indicates whether an interrupt is requested or not. An
interrupt request is the logical OR of the INTSTR0 and
INTSTR1 flags. The INTSTR0 and INTSTR1 flags set is
controlled by the enable bits in INTCR0 and INTCR1.
0: No interrupt requested.
1: Interrupt requested.
START bit in CMDSTRT has not been set yet, so
the new command can be written.
is being transmitted. If a new command is written,
a malfunction will result.
sequence execution in progress
sequence termination.
Rev. 2.00 Feb. 12, 2010 Page 955 of 1330
REJ09B0554-0200