MAXQ610A-0000+ Maxim Integrated Products, MAXQ610A-0000+ Datasheet - Page 8

• Manufacturer Part Number: MAXQ610A-0000+
• Description: IC MCU 16BIT 64K IR MOD 32TQFN
• Manufacturer: Maxim Integrated Products
• Series: MAXQ™r

Specifications of MAXQ610A-0000+

• Core Processor: RISC
• Core Size: 16-Bit
• Speed: 12MHz
• Connectivity: SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Infrared, Power-Fail, POR, WDT
• Number Of I /o: 20
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.7 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 32-TQFN Exposed Pad
• Processor Series: MAXQ610
• Core: RISC
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: SPI, USART
• Maximum Clock Frequency: 12 MHz
• Number Of Timers: 4
• Operating Supply Voltage: 1.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Controller Family/series: MAXQ
• No. Of I/o's: 24
• Ram Memory Size: 2048Byte
• Cpu Speed: 12MHz
• No. Of Timers: 2
• Embedded Interface Type: JTAG, SPI, USART
• Rohs Compliant: Yes
• Number Of Programmable I/os: 32
• Development Tools By Supplier: MAXQ610-KIT
• Package: 32TQFN EP
• Family Name: MAXQ
• Maximum Speed: 12 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 90-M6800+B01

16-Bit Microcontroller with Infrared Module
8
9–12, 15, 16,
_______________________________________________________________________________________
19, 20
25–28
21–24
PIN
P1.0–P1.7;
INT0–INT7
P2.4–P2.7;
TMS, TDO
TCK, TDI,
NAME
N.C.
General-Purpose, Digital, I/O, Type-D Port; External Edge-Selectable Interrupt. These port pins
function as bidirectional I/O pins or as interrupts. All port pins default to high-impedance mode
after a reset. Software must configure these pins after release from reset to remove the high-
impedance input condition. All interrupt functions must be enabled from software.
General-Purpose, Digital, I/O, Type-C Port. These port pins function as bidirectional I/O pins.
Software must configure these pins after release from reset to remove the high-impedance input
condition. All alternate functions must be enabled from software. Enabling the pin’s special
function disables the general-purpose I/O on the pin.
The JTAG pins (P2.4–P2.7) default to their JTAG function with weak pullups enabled after a
reset. The JTAG function can be disabled using the TAP bit in the SC register.
P2.7 functions as the JTAG test-data output on reset and defaults to an input with a weak
pullup. The output function of the test data is only enabled during the TAP’s Shift_IR or Shift_DR
states.
No Connection
PIN
PIN
10
11
12
15
16
19
20
25
26
27
28
9
NO CONNECTION PINS
FUNCTION
PORT
PORT
P1.0
P1.1
P1.2
P1.3
P1.4
P1.5
P1.6
P1.7
P2.4
P2.5
P2.6
P2.7
Pin Description (continued)
SPECIAL FUNCTION
SPECIAL FUNCTION
INT0
INT1
INT2
INT3
INT4
INT5
INT6
INT7
TMS
TDO
TCK
TDI