MC68HC908GR8CFA Freescale Semiconductor, MC68HC908GR8CFA Datasheet - Page 94

• Manufacturer Part Number: MC68HC908GR8CFA
• Description: IC MCU FLSH 8BIT8MHZ 7.5K32-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908GR8CFA

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 21
• Program Memory Size: 7.5KB (7.5K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Break Module (BRK)
6.4.3 TIMI and TIM2 During Break Interrupts
6.4.4 COP During Break Interrupts
6.5 Low-Power Modes
6.5.1 Wait Mode
6.5.2 Stop Mode
6.6 Break Module Registers
Technical Data
94
The break interrupt begins after completion of the CPU instruction in
progress. If the break address register match occurs on the last cycle of
a CPU instruction, the break interrupt begins immediately.
A break interrupt stops the timer counters.
The COP is disabled during a break interrupt when V
the RST pin.
The WAIT and STOP instructions put the MCU in low power-
consumption standby modes.
If enabled, the break module is active in wait mode. In the break routine,
the user can subtract one from the return address on the stack if SBSW
is set. See
A break interrupt causes exit from stop mode and sets the SBSW bit in
the break status register.
These registers control and monitor operation of the break module:
Freescale Semiconductor, Inc.
•
•
For More Information On This Product,
Break status and control register (BRKSCR)
Break address register high (BRKH)
Low Power
Go to: www.freescale.com
Break Module (BRK)
Modes. Clear the BW bit by writing logic 0 to it.
MC68HC908GR8 — Rev 4.0
TST
is present on
MOTOROLA