2866598 Phoenix Contact, 2866598 Datasheet - Page 8

• Manufacturer Part Number: 2866598
• Description: UPS 4A 12VDC
• Manufacturer: Phoenix Contact
• Series: Minir

Specifications of 2866598

• Voltage - Output: 12V
• Number Of Outputs: 1
• Power (watts): 48W
• Applications: Commercial
• Power Supply Type: Switching (Closed Frame)
• Voltage - Input: 100 ~ 240VAC
• Mounting Type: DIN Rail
• 1st Output: 12 VDC @ 4A
• Size / Dimension: 4.53" L x 2.66" W x 3.90" H (115mm x 67.5mm x 99mm)
• Operating Temperature: -25°C ~ 70°C
• Power (watts) - Rated: 48W
• Efficiency: 82%
• Approvals: cUL, EN, UL, VDE
• Output Voltage Rating: 12 V
• Number Of Outlets: 1
• Tower / Rackmount: DIN Rail
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

104211_en_00
6
7
8
t...[min]
Battery
L(+)
N(-)
Block diagram
Safety and warning notes
Installation
DANGER
The device contains dangerous live elements and high levels of stored energy.
Never carry out work when the power is turned on.
Depending on the ambient temperature and the load, the housing can become very hot!
WARNING
Before startup please ensure:
The mains connection has been carried out by a competent person and protection against electric shock is
guaranteed!
The device can be disconnected outside the power supply unit in accordance with the regulations as in EN
60950 (e.g. through primary side line protection)!
All feed lines are sufficiently protected and dimensioned!
All output lines are dimensioned according to the maximum output current of the device or separately
protected!
Sufficient convection is guaranteed!
CAUTION
The power supply units are built-in devices. The device may only be installed and put into operation by qualified
personnel. The corresponding national regulations must be observed.
PS
R1
R2
Alarm
Bat.-Mode
Bat.-Charge
Output DC
Remote
On/Off
12 V 4 A
In order for the device to function in the manner
intended. it is not necessary to observe any
minimum spacing to other devices.
The power supply unit can be snapped onto all
DIN rails in acc. with EN 60715. They must be
mounted horizontally (connecting terminal
blocks top and bottom).
MINI-DC-UPS/12DC/4
PHOENIX CONTACT
8