MTCMR-G-F4 Multi-Tech Systems, MTCMR-G-F4 Datasheet - Page 56

• Manufacturer Part Number: MTCMR-G-F4
• Description: MODEM GPRS QUAD BAND GSM GLOBAL
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-G-F4

• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Function: Transceiver, Modem
• Data Rate - Maximum: 115.2kbps
• Modulation Or Protocol: GSM, GPRS
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module with Case
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Power - Output: -
• Sensitivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 881-1151; MTCMR-G-F4

Avoid Phonebook Initialization +WAIP
Delete Calls Phonebook +WDCP
Set Voice Mail Number +CSVM
Multi-Tech Systems, Inc. GPRS AT Commands Reference Guide (Document Number S000293J)
Description:
Values:
Syntax:
Description:
Values:
Syntax:
Description:
Values:
Syntax:
Caution:
Note:
Command
AT+WDCP?
AT+WDCP=?
Note: Possible values ?
AT+WDCP=”LD”
Note: Delete all the content of Last Dialing phonebook.
No phonebook commands are allowed if +WAIP=1 (after boot). If a phonebook command is entered, a “+CME
ERROR: 3” is returned.
new <mode> value.
The given value should be stored in EEPROM. Therefore, the AT&W command must be used to save the
Command
AT+CSVM?
Note: Get mail number
AT+CSVM=?
Note: Possible values ?
AT+CSVM=0,”888”,129
Note: Disable Voice Mail number and
change value to “888”.
This specific command allows the initialization of all phonebooks to be inhibited during subsequent
boots.
<mode>
Command Syntax: AT+WAIP=<mode>
This specific command deletes the calls listed in some phonebooks.
<calls phonebook>
Command Syntax: +WDCP=<calls phonebook>
This commands sets/gets and enables/disables the voice mail number in memory.
<mode>
<number> Phone number in ASCII format.
<type>
Command Syntax: AT+CSVM=<mode>[,<number>[,<type>]]
Command
AT+WAIP?
Note: Current values ?
AT+WAIP=?
Note: Possible values ?
AT+WAIP =1
Note: Inhibit initialization of phonebooks (next boot)
AT&W
Note: Save modifications in EEPROM
0
1
“LD”
“MC”
“RC”
0
1
Normal initialization (with phonebooks)
No phonebook initialization
Disable the voice mail number
Enable the voice mail number
Note:
‘+’. Otherwise, the value is 129. Example: A <type> value of 17 will be written as 145.
SIM (ME extended) Last dialing phonebook
ME missed calls list phonebook
ME received calls list phonebook
TON/NPI (Type of address byte in integer format).
The value is 145 if the dialing string includes the international access code character
Possible responses
+CSVM: 1,”660”,129
OK
+CSVM: (0-1),(129,145)
OK
Note: activation/deactivation and format 129 & 145 are supported
OK
Possible responses
OK
+WDCP: ("LD","MC","RC")
OK
Note: Identifiers of the phonebooks supporting a list of calls
OK
Note: Last Dialing phonebook is now empty.
Note: Voice mail number “660” is activated
Possible responses
+WAIP:0
OK
Note: Default value (init phonebooks)
+WAIP: (0,1)
OK
Note: Disable / enable
OK
Note: no answer
Chapter 8 – Phonebook Commands
56