MTCMR-G-F4 Multi-Tech Systems, MTCMR-G-F4 Datasheet - Page 83

• Manufacturer Part Number: MTCMR-G-F4
• Description: MODEM GPRS QUAD BAND GSM GLOBAL
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-G-F4

• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Function: Transceiver, Modem
• Data Rate - Maximum: 115.2kbps
• Modulation Or Protocol: GSM, GPRS
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module with Case
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Power - Output: -
• Sensitivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 881-1151; MTCMR-G-F4

Calling Line Identification Restriction +CLIR
Calling Line Identification Presentation +CLIP
Multi-Tech Systems, Inc. GPRS AT Commands Reference Guide (Document Number S000293J)
Description:
Values:
Syntax:
Description:
Values:
Syntax:
This command controls the Calling Line Identification restriction supplementary service.
<n> Sets the line ID restriction for outgoing calls
<m> Shows the subscriber CLIR status in the network
Command syntax: AT+CLIR=<n>
Response syntax: +CLIR:<n>,<m>
This command controls the calling line identification presentation supplementary service. When
presentation of the CLI (Calling Line Identification) is enabled (and calling subscriber allows), +CLIP
response is returned after every RING (or +CRING) result code.
<n> Parameter sets/shows the result code presentation in the TA
<m> parameter shows the subscriber CLIP service status in the network
Command syntax: AT+CLIP=<n>
Response syntax: +CLIP: <n>,<m> (as response to AT+CLIP)
Command
AT+CLIP=1
Note: Enable CLIP
AT+CLIP?
Note: Ask for current functionality
AT+CLIP=0
Note: Disable CLIP presentation
Command
AT+CLIR=2
AT+CLIR ?
Note: Ask for current functionality
0 Presentation indicator is used according to the subscription of the CLIR service
1 CLIR invocation
2 CLIR suppression
0
1
2
3
4
0
1
0
1
2
CLIR not provisioned
CLIR provisioned in permanent mode
Unknown (no network…)
CLIR temporary mode presentation restricted
CLIR temporary mode presentation allowed
Disable
Enable
CLIP not provisioned
CLIP provisioned
Unknown (no network…)
+CLIP: <number>, <type>[ ,<subaddr>, <satype>, <alpha> ] (for an incoming call,
after each RING or +CRING indication)
Possible responses
OK
Note: Command valid
+CLIR:<n>,<m>
OK
Note: <n> and <m> as defined above
(for AT+CLIR ?)
Possible responses
OK
Note: CLIP is enabled
+CLIP:<n>,<m>
OK
Note: <n> and <m> defined as below
RING
Note: Incoming call
+CLIP: “0146290800”,129,1,,,”FRED”
Note: Incoming call with number and name presentation
RING
Note: Incoming call
+CLIP: “0146290800”,129,1,, “8000204212FFFF”
Note: Incoming call with number and name presentation
(UCS2 format)
OK
Note: Command valid
Chapter 10 – Supplementary Services Commands
83