MTCMR-G-F4 Multi-Tech Systems, MTCMR-G-F4 Datasheet - Page 74

• Manufacturer Part Number: MTCMR-G-F4
• Description: MODEM GPRS QUAD BAND GSM GLOBAL
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-G-F4

• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Function: Transceiver, Modem
• Data Rate - Maximum: 115.2kbps
• Modulation Or Protocol: GSM, GPRS
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module with Case
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Power - Output: -
• Sensitivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 881-1151; MTCMR-G-F4

Service Center Address +CSCA
Select Cell Broadcast Message Types +CSCB
Multi-Tech Systems, Inc. GPRS AT Commands Reference Guide (Document Number S000293J)
Description:
Values:
Syntax:
Description:
Values:
Syntax:
This command indicates the service center to which the message must be sent.
The product has no default value for this address. If the application tries to send a message without
having indicated the service center address, an error will be generated.
Therefore, the application must indicate the SC address when initializing the SMS. This address is then
permanently valid. The application may change it if necessary.
<sca> service center address
Command Syntax: AT+CSCA=<sca>
This command selects which types of CBMs are to be received by the ME. This command is allowed in
both PDU and text modes.
The <bm> parameter of +CNMI command controls the message indication.
The activation of CBM reception (<mode>=0) can select only specific Message Indentifiers (list in
<mids>) for specific Languages (list in <dcss>), but the deactivation stops any reception of CBMs
(only AT+CSCB=1 is allowed).
Message Identifiers (<mids> parameter) indicates the type of message identifiers for which the ME
should listen.
<dcss> Supported languages
Command Syntax: AT+CSCB= <mode>, [ <mids>, [ <dcss> ] ]
Important Note: Test/read command AT+CSCB? is not supported.
Command
AT+CMGS= “[phone]”<CR>
Hello, how are you?<ctrl-Z>
Note: Send a message
AT+CSCA=”0696741234”
Note: Service center initialization
AT+CMGS=”[phone]”<CR>
Happy Birthday ! <ctrl-Z>
Note:
Command
AT+CSCB=0,”15-17,50,86”,” ”
Note: Accept SMS-CB types, 15,16,17,50 and
86 in any language
AT+CSCB=1
Note: Deactivate the reception of CBMs
0 for German
1 for English
2 for Italian
3 for French
4 for Spanish
5 for Dutch
6 for Swedish
7 for Danish
8 for Portuguese
9 for Finnish
10 for Norwegian
11 for Greek
12 for Turkish
13 for Hungarian
14 for Polish
32 for Czech
Possible responses
+CMS ERROR: 330
Note: service center unknown
OK
+CMGS: 1
OK
Note: Successful transmission
Possible responses
OK
Note: CBMs can be received
+CBM: 10<CR><LF>
00112233445566778899
Note: CBM length of a received Cell Broadcast
message (SMS-CB), CBM bytes in PDU mode
OK
Note: CBM reception is completely stopped
Chapter 9 – Short Messages Commands
74