PIC16LF1827-I/MV Microchip Technology, PIC16LF1827-I/MV Datasheet - Page 157

• Manufacturer Part Number: PIC16LF1827-I/MV
• Description: IC, 8BIT MCU, PIC16LF, 32MHZ, QFN-28
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF1827-I/MV

• Controller Family/series: PIC16LF
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 384Byte
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Interface: EUSART, I2C, SPI
• Core Size: 8 Bit
• Program Memory Size: 4kWords
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-UFQFN Exposed Pad
• Processor Series: PIC16LF
• Core: PIC
• Data Ram Size: 256 B
• Maximum Clock Frequency: 32 KHz
• Number Of Programmable I/os: 16
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• On-chip Dac: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

REGISTER 16-1:
REGISTER 16-2:
 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7
bit 6
bit 5
bit 4
bit 3-2
bit 1
bit 0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-5
bit 4-0
Note 1:
R/W-0/0
DACEN
U-0
—
The output select bits are always right justified to ensure that any number of bits can be used without
affecting the register layout.
DACEN: DAC Enable bit
1 = DAC is enabled
0 = DAC is disabled
DACLPS: DAC Low-Power Voltage State Select bit
1 = DAC Positive reference source selected
0 = DAC Negative reference source selected
DACOE: DAC Voltage Output Enable bit
1 = DAC voltage level is also an output on the DACOUT pin
0 = DAC voltage level is disconnected from the DACOUT pin
Unimplemented: Read as ‘0’
DACPSS<1:0>: DAC Positive Source Select bits
00 = V
01 = V
10 = FVR Buffer2 output
11 = Reserved, do not use
Unimplemented: Read as ‘0’
DACNSS: DAC Negative Source Select bits
1 = V
0 = V
Unimplemented: Read as ‘0’
DACR<4:0>: DAC Voltage Output Select bits
V
OUT
DACLPS
R/W-0/0
U-0
—
= ((V
REF
DACCON0: VOLTAGE REFERENCE CONTROL REGISTER 0
SS
DACCON1: VOLTAGE REFERENCE CONTROL REGISTER 1
REF
DD
-
SRC
+
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
+) - (V
R/W-0/0
DACOE
U-0
—
SRC
-))*(DACR<4:0>/(2
R/W-0/0
U-0
Preliminary
—
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
5
)) + V
R/W-0/0
R/W-0/0
DACPSS<1:0>
SRC
-
PIC16F/LF1826/27
DACR<4:0>
R/W-0/0
R/W-0/0
R/W-0/0
U-0
—
DS41391C-page 157
DACNSS
R/W-0/0
R/W-0/0
bit 0
bit 0