PIC18LF8680-I/PT Microchip Technology, PIC18LF8680-I/PT Datasheet - Page 287

• Manufacturer Part Number: PIC18LF8680-I/PT
• Description: IC, 8BIT MCU, PIC18LF, 40MHZ, PLCC-64
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF8680-I/PT

• Controller Family/series: PIC18
• No. Of I/o's: 39
• Eeprom Memory Size: 1024Byte
• Ram Memory Size: 3328Byte
• Cpu Speed: 40MHz
• No. Of Timers: 4
• Core Size: 8 Bit
• Program Memory Size: 32768 Words
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.25K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Rohs Compliant: Yes
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3328 B
• Interface Type: I2C, SPI, AUSART, CAN
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 69
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM183032
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

23.2.2
This section describes the dedicated CAN Transmit
Buffer registers and their associated control registers.
REGISTER 23-5:
 2004 Microchip Technology Inc.
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1-0
Mode 1, 2
DEDICATED CAN TRANSMIT
BUFFER REGISTERS
Mode 0
TXBnCON: TRANSMIT BUFFER n CONTROL REGISTERS [0
bit 7
Legend:
C = Clearable bit
‘1’ = Bit is set
Mode 0:
Unimplemented: Read as ‘0’
Mode 1, 2:
TXBIF: Transmit Buffer Interrupt Flag bit
1 = Transmit buffer has completed transmission of message and may be reloaded
0 = Transmit buffer has not completed transmission of a message
TXABT: Transmission Aborted Status bit
1 = Message was aborted
0 = Message was not aborted
TXLARB: Transmission Lost Arbitration Status bit
1 = Message lost arbitration while being sent
0 = Message did not lose arbitration while being sent
TXERR: Transmission Error Detected Status bit
1 = A bus error occurred while the message was being sent
0 = A bus error did not occur while the message was being sent
TXREQ: Transmit Request Status bit
1 = Requests sending a message. Clears the TXABT, TXLARB, and TXERR bits.
0 = Automatically cleared when the message is successfully sent
Unimplemented: Read as ‘0’
TXPRI1:TXPRI0: Transmit Priority bits
11 = Priority Level 3 (highest priority)
10 = Priority Level 2
01 = Priority Level 1
00 = Priority Level 0 (lowest priority)
TXBIF
R/C-0
Note:
Note 1: This bit is automatically cleared when TXREQ is set.
U-0
—
2: While TXREQ is set, Transmit Buffer registers remain read-only.
3: These bits define the order in which transmit buffers will be transferred. They do not
Clearing this bit in software while the bit is set, will request a message abort.
alter the CAN message identifier.
TXABT
TXABT
R-0
R-0
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
R = Readable bit
PIC18F6585/8585/6680/8680
TXLARB
TXLARB
R-0
R-0
(2)
TXERR
TXERR
(3)
R-0
R-0
W = Writable bit
(1)
(1)
TXREQ
TXREQ
R/W-0
R/W-0
(1)
x = Bit is unknown
- n = Value at POR
U-0
U-0
—
—
TXPRI1
TXPRI1
n
R/W-0
R/W-0
DS30491C-page 285
2]
TXPRI0
TXPRI0
R/W-0
R/W-0
bit 0