PIC18LF8680-I/PT Microchip Technology, PIC18LF8680-I/PT Datasheet - Page 352

• Manufacturer Part Number: PIC18LF8680-I/PT
• Description: IC, 8BIT MCU, PIC18LF, 40MHZ, PLCC-64
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF8680-I/PT

• Controller Family/series: PIC18
• No. Of I/o's: 39
• Eeprom Memory Size: 1024Byte
• Ram Memory Size: 3328Byte
• Cpu Speed: 40MHz
• No. Of Timers: 4
• Core Size: 8 Bit
• Program Memory Size: 32768 Words
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.25K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Rohs Compliant: Yes
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3328 B
• Interface Type: I2C, SPI, AUSART, CAN
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 69
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM183032
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18F6585/8585/6680/8680
REGISTER 24-5:
REGISTER 24-6:
DS30491C-page 350
bit 7
bit 6-2
bit 1
bit 0
bit 7
bit 6-3
bit 2
bit 1
bit 0
CONFIG3H: CONFIGURATION REGISTER 3 HIGH (BYTE ADDRESS 300005h)
CONFIG4L: CONFIGURATION REGISTER 4 LOW (BYTE ADDRESS 300006h)
MCLRE: MCLR Enable bit
1 = MCLR pin enabled, RG5 input pin disabled
0 = RG5 input enabled, MCLR disabled
Unimplemented: Read as ‘0’
ECCPMX: CCP1 PWM outputs P1B, P1C mux bit (PIC18F8X8X devices only)
1 = P1B, P1C are multiplexed with RE6, RE5
0 = P1B, P1C are multiplexed with RH7, RH6
CCP2MX: CCP2 Mux bit
In Microcontroller mode:
1 = CCP2 input/output is multiplexed with RC1
0 = CCP2 input/output is multiplexed with RE7
In Microprocessor, Microprocessor with Boot Block and Extended Microcontroller modes
(PIC18F8X8X devices only):
1 = CCP2 input/output is multiplexed with RC1
0 = CCP2 input/output is multiplexed with RB3
bit 7
DEBUG: Background Debugger Enable bit
1 = Background debugger disabled. RB6 and RB7 configured as general purpose I/O pins.
0 = Background debugger enabled. RB6 and RB7 are dedicated to in-circuit debug.
Unimplemented: Read as ‘0’
LVP: Low-Voltage ICSP Enable bit
1 = Low-voltage ICSP enabled
0 = Low-voltage ICSP disabled
Unimplemented: Read as ‘0’
STVREN: Stack Full/Underflow Reset Enable bit
1 = Stack full/underflow will cause Reset
0 = Stack full/underflow will not cause Reset
bit 7
Legend:
R = Readable bit
- n = Value when device is unprogrammed
Legend:
R = Readable bit
- n = Value when device is unprogrammed
DEBUG
MCLRE
Note 1: If MCLR is disabled, either disable low-voltage ICSP or hold RB5/PGM low to
R/P-1
R/P-1
2: Reserved for PIC18F6X8X devices; maintain this bit set.
ensure proper entry into ICSP mode.
U-0
U-0
—
—
P = Programmable bit
P = Programmable bit
(1)
U-0
—
U-0
—
U-0
—
U-0
—
U = Unimplemented bit, read as ‘0’
u = Unchanged from programmed state
U = Unimplemented bit, read as ‘0’
u = Unchanged from programmed state
U-0
—
U-0
—
R/P-1
LVP
U-0
—
 2004 Microchip Technology Inc.
ECCPMX
R/P-1
U-0
—
(2)
CCP2MX
STVREN
R/P-1
R/P-1
bit 0
bit 0