PIC18F6722-E/PT Microchip Technology, PIC18F6722-E/PT Datasheet - Page 2

• Manufacturer Part Number: PIC18F6722-E/PT
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,TQFP,64PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F6722-E/PT

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 54
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-TFQFP
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3936 B
• Interface Type: SPI, I2C, EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 54
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM183032, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180020 - MODULE PLUG-IN HPC EXPL 18F87J11
• Lead Free Status / Rohs Status: Details

PIC18F6627/6722/8627/8722
4. Module: A/D
TABLE 1:
5. Module: MSSP
DS80221C-page 2
Param
A06A
A06
No.
The A/D offset is greater than the specified limit in
Table 28-26 of the Device Data Sheet. The
updated conditions and limits are shown in bold
text in Table 1.
Work around
Three work arounds exist:
1. Configure the A/D to use the V
2. Perform a conversion on a known voltage
3. Increase system clock speed and adjust A/D
Date Codes that pertain to this issue:
All engineering and production devices.
I
RCEN bit should be set) only when the system is
idle (i.e., ACKEN, RCEN, PEN, RSEN and SEN all
equal zero). It should not be possible to set the
RCEN bit when the system is not idle; however,
the RCEN bit can be set under this circumstance.
Work around
Wait for the system to become idle before setting
the RCEN bit. This requires a check for the
following bits to be clear: ACKEN, RCEN, PEN,
RSEN and SEN.
Date Codes that pertain to this issue:
All engineering and production devices.
2
C™ Receive mode should be enabled (i.e.,
pins for the voltage references. This is done by
setting the VCFG<1:0> bits (ADCON1<5:4>).
reference voltage and adjust the A/D result in
software.
settings accordingly. Higher system clock
frequencies decrease offset error.
E
E
Symbol
OFF
OFF
A/D CONVERTER CHARACTERISTICS: PIC18F6X27/6X22/8X27/8X22 (INDUSTRIAL, EXTENDED)
Offset Error
Offset Error
Characteristic
REF
+ and V
REF
Min
—
—
-
PIC18LF6X27/6X22/8X27/8X22 (INDUSTRIAL)
6. Module: ECCP
Typ
—
—
When switching direction in Full-Bridge PWM
mode, the modulated outputs will switch immedi-
ately instead of waiting for the next PWM cycle.
This may generate unexpected short pulses on the
modulated outputs.
Work around
Disable the PWM or set duty cycle to zero prior to
switching directions.
Date Codes that pertain to this issue:
All engineering and production devices.
Max
±1.5
±3.5
Units
LSb
LSb
© 2006 Microchip Technology Inc.
V
V
REF
REF
= V
= V
Conditions
REF
SS
and V
+ and V
DD
REF
-