C200H-CN222 Omron, C200H-CN222 Datasheet - Page 27

• Manufacturer Part Number: C200H-CN222
• Description: CPM1A/CPM2A CABLE
• Manufacturer: Omron

Specifications of C200H-CN222

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Peripheral Device
Connectors
Direct Mounting
Cable Connection
CPU
Note If you are using the SYSMAC LINK Unit or SYSMAC NET Link Unit in your sys-
All three CPU models are equipped with two connectors for peripheral devices.
One is used for the Handheld Programming Console or the Data Access Con-
sole; the other is used for the CPU-Mounting Programming Console. The
C200H-CPU11-E, however, has a third connector that is used for connecting the
SYSMAC LINK Unit or the SYSMAC NET Link Unit to the CPU.
To connect the Handheld Programming Console to the CPU, a Connecting
Cable is required, as shown in the following diagram.
tem, you must use model C200H-CPU11-E as the CPU. The other two models
mentioned above are not equipped with the appropriate connectors.
The CPU-mounting Programming Console can be mounted directly to the CPU
and does not require a Connecting Cable. To mount the CPU-Mounting Pro-
gramming Console (or any other peripheral device) directly to the CPU, follow
the steps below.
The CPU-mounting Programming Console, when mounted to the CPU, covers
the two I/O Units located directly to the left of the CPU. For this reason it is impor-
tant to know which shapes can be mounted to these slots.
Notice, in the following diagram, that the two I/O Units mounted directly to the left
of the CPU are A-shape Units. The CPU-mounting Programming Console can
be mounted to the CPU provided A-shape I/O Units are mounted to these two
slots. Make sure the protective covers of the two I/O Units are in place to avoid
electrical interference with the CPU.
Because the surface of B-shape and E-shape I/O Units protrudes a few centime-
ters from surface of the CPU, B-shape and E-shape I/O Units cannot be
mounted to the two slots to the left of the CPU unless a Programming Console
Base Unit is first mounted to the CPU to increase the mounting height of the Pro-
gramming Console.
Handheld
Programming Console
Connecting Cable
Section
2-2
13