C200H-CN222 Omron, C200H-CN222 Datasheet - Page 74

• Manufacturer Part Number: C200H-CN222
• Description: CPM1A/CPM2A CABLE
• Manufacturer: Omron

Specifications of C200H-CN222

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Inspection and Maintenance
Output Unit Relays
60
1, 2, 3...
1, 2, 3...
To replace a Relay, follow the steps below:
1. Turn OFF the power to the PC.
2. Detach the terminal block by unlocking the lock levers at the top and bottom
3. While pushing down the lock lever on the Backplane with a screwdriver as
4. Remove the screw from the top of the Unit (Phillips screwdriver).
5. Detach the case from the Unit (flat-blade screwdriver).
6. Pull out the printed circuit board.
7. Insert a new fuse. A spare fuse is provided inside the rear of the case when
8. Reassemble in reverse order of assembly.
1. Turn OFF the power to the PC.
2. Detach the terminal block by unlocking the lock levers at the top and bottom
of the terminal block.
shown below, remove the Output Unit.
the Unit is delivered.
of the terminal block.
Appendix A