CS1W-BAT01 Omron, CS1W-BAT01 Datasheet - Page 42

• Manufacturer Part Number: CS1W-BAT01
• Description: "BATTERY,CPU,CS1 SERIES ONLY"
• Manufacturer: Omron

Specifications of CS1W-BAT01

• Rohs Compliant: YES
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Ordering Information
Note: Either of the serial communications modes listed in the following table can be used to connect CX-One Support Software
USB-Serial Conversion
Cable (PC driver CD-
ROM included)
Conforms to USB 1.1
Specifications.
Peripheral bus
Host Link (SYSWAY)
42
Serial communications
(e.g., the CX-Programmer) to a CS1-series PLC.
Name
mode
computers
IBM PC/AT
or
compatible
computer
(USB port)
This mode can provide high-speed communications, so this mode is normally used to connect when using CX-One component software
such as the CX-Programmer.
• Supports 1:1 connections only.
• The Programming Device’s baud rate can be detected automatically and matched.
This is a general host computer communications protocol, which supports 1:1 and 1:N connections.
• Host link operates at a slower speed than peripheral bus.
• Host link supports 1:N connections as well as long-distance connections when RS-422A/RS-485 is used for a connection through a
Applicable
modem or optical adapter.
IBM PC/AT or compatible computer ↔ CS1W-CIF31
↔ CS1W-CN226/626 ↔ Peripheral port of CPU Unit
(See note.)
Note: If the system is a Duplex CPU System, connect
IBM PC/AT or compatible computer ↔ CS1W-CIF31
↔ XW2Z-200S-CV/500S-CV ↔ CS1W-CN118 ↔
Peripheral port of CPU Unit
IBM PC/AT or compatible computer ↔ CS1W-CIF31
↔ XW2Z-200S-V/500S-V ↔ CS1W-CN118 ↔
Peripheral port of CPU Unit
IBM PC/AT or compatible computer ↔ CS1W-CIF31
↔ XW2Z-200S-CV/500S-CV ↔ CS1W-CN118 ↔ RS-
232C port of CPU Unit or Serial Communications
Board/Unit
IBM PC/AT or compatible computer ↔ CS1W-CIF31
↔ XW2Z-200S-V/500S-V ↔ RS-232C port of CPU
Unit or Serial Communications Board/Unit
Computer
(USB port)
to the active CPU Unit.
CS1W-CIF31
USB-Serial Conversion Cable
Serial Connecting Cable
Such as CS1W-CN226/626,
XW2Z-200S-CV/500S-CV,
XW2Z-200S-V/500S-V, or
CQM1-CIF02
Connection configuration
Specifications
Peripheral port or
RS-232C port
Features
The USB-
Serial
Conversion
Cable
connects to
the serial
connecting
cable, which
connects to
the PLC’s
peripheral
port or RS-
232C port.
0.5 m
length
Cable
Can be used for
both peripheral
bus and host link .
Can be used for
both peripheral
bus and host link .
Can be used for
host link only.
Cannot be used for
peripheral bus.
Can be used for
both peripheral
bus and host link .
Can be used for
host link only.
Cannot be used for
peripheral bus.
Remarks
CS1W-
CIF31
Model
---
Standards