17 26 220 2101 HARTING, 17 26 220 2101 Datasheet - Page 6

• Manufacturer Part Number: 17 26 220 2101
• Description: HARD METRIC CONNECTOR, RECEPTACLE 220POS
• Manufacturer: HARTING
• Series: Har-bus HMr

Specifications of 17 26 220 2101

• Row Pitch: 2mm
• Pitch Spacing: 2mm
• No. Of Contacts: 220
• Gender: Receptacle
• Contact Termination: Right Angle Press Fit
• No. Of Rows: 5
• Connector Type: Hard Metric (HM)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Due to the high deformation capability and resilience
of
and repeatedly removed in case of repairs without
impairment to their functioning.
and offer a reliable electrical contact, therefore they
are especially well suited for applications with these
surfaces.
Please contact us for detailed test reports.
Benefits of press-in technology
Recommended configuration of plated through
holes
In addition to the hot-air-level (HAL), other pcb
surfaces are getting more important. Due to their
different properties, such as mechanical strength and
coefficient of friction we recommend the following
configuration of pcb through holes.
Tin plated
PCB (HAL)
acc. EN 60 352-5
Chemical
tin plated PCB
Au / Ni plated PCB
Silver plated PCB
OSP
copper plated PCB
Thermal shocks associated with the soldering
process and the risk of the board malfunction are
avoided.
No need for the subsequent cleaning of the
assembled pcb’s
Unlimited and efficient processing of partially gold-
plated pins for rear I/O - manual soldering is no
longer necessary!
press-in contacts are extremely versatile
press-in contacts, they can be easily
PCB board thickness: ≥ 1.4 mm
Hole-Ø
Cu
Sn
Plated hole-Ø
Hole-Ø
Cu
Sn
Plated hole-Ø
Hole-Ø
Cu
Ni
Au
Plated hole-Ø
Hole-Ø
Cu
Ag
Plated hole-Ø
Hole-Ø
Cu
Plated hole-Ø
Recommended configuration of plated through holes
0.60-0.65 mm
0.60-0.65 mm
0.60-0.65 mm
0.60-0.65 mm
0.60-0.65 mm
0.05-0.12 μm
max. 15 μm
min. 0.8 μm
0.7
0.7
0.7
0.7
0.7
min. 25 μm
min. 25 μm
min. 25 μm
min. 25 μm
0.1-0.3 μm
min. 25 μm
3-7 μm
±0.02
±0.02
±0.02
±0.02
±0.02
mm
mm
mm
mm
mm
Fig. 1:
Press-in zone
in plated through hole
Fig. 2:
Recommended
configuration of plated
through holes,
valid for
Plated hole-Ø
chem. Sn
pure Cu
Pd
Au
Ag
Hole-Ø
e.g. Sn
Cu
11
05