17 26 220 2101 HARTING, 17 26 220 2101 Datasheet - Page 7

• Manufacturer Part Number: 17 26 220 2101
• Description: HARD METRIC CONNECTOR, RECEPTACLE 220POS
• Manufacturer: HARTING
• Series: Har-bus HMr

Specifications of 17 26 220 2101

• Row Pitch: 2mm
• Pitch Spacing: 2mm
• No. Of Contacts: 220
• Gender: Receptacle
• Contact Termination: Right Angle Press Fit
• No. Of Rows: 5
• Connector Type: Hard Metric (HM)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

11
06
Circuit density
HARTING offers 13 contact lengths for
male connectors: the standard mating length
of 8.2 mm, pre-leading contacts with 9.7 mm
and extra long contacts preferred for shielding
with 11.2 mm mating length.
On the termination side the standard length is 3.7 mm.
With the three termination lengths of 13.0, 14.5
and 16.0 mm even for rear I/O applications different
mating levels are possible, depending on the pcb
thickness and shroud height.
Contact dimensions [mm]
When using the specified diameter of the finished
through hole according to IEC 61076-4-101
(0.6 ± 0.05 mm) with an appropriate annular ring,
the remaining distance between the rings is about
1 mm. Under the condition that the width of the track
and the space between should be equal, two tracks
of 0.2 mm width or three tracks of 0.14 mm width
can be placed between two rings. Typical designs
are shown in the drawing on the right side.
Contacts for male connectors
For the standard termination length, an extra short
contact for special applications with a mating length
of 7.2 mm is available.
The different contact lengths are designated with
letters to identify them in the configurations. For
special loadings please use the customer request
form at the end of this chapter.
All contacts are offered with press-in termination ‘eye
of the needle’. In accordance with the application
they can be delivered in performance level 1 or 2.