COBOX-FL-11 Lantronix, COBOX-FL-11 Datasheet - Page 48

• Manufacturer Part Number: COBOX-FL-11
• Description: Ethernet Modules & Development Tools EXTERNAL DUAL PORT
• Manufacturer: Lantronix
• Type: Device Serversr

Specifications of COBOX-FL-11

• Product: Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Configure
3.4 Configuring via the Setup Mode Window
3.4.1 Using a Telnet Connection
To configure the unit over the network, establish a Telnet connection to port 9999.
Note: If you use the Telnet to Device icon on the Device Installer Device Management
window OR a serial port lo
1. From the Windows Start menu, click Run and type the followin
Note: Be sure to include a space between the IP address and 9999.
2. Click OK.
3. The Lantronix Universal Device Server window displays.
4. To enter the Setup Mode, you must press Enter within 5
Note: The following line appears only with IAP Standard Tunnel Protocol Firmware.
5. Select an option on the menu by entering the number of the option in the Your choice
6. To enter a value for a parameter, ty
7. When you are finished, save the new configurations (option 9). The unit will reboot.
3-10
x.x.x.x is the IP address and 9999 is the unit’s fixed network co
sett
field and pressing Enter.
value, just press Enter.
ings will appear. See Figure 13 - Setup M
telnet x.x.x.x 9999
Serial Number 7218033 MAC address 00:20:4A:72:46:71
Software version 04.5 (011025)
Pr
Model: Device Server Plus+!
*** Lantronix Universal Device Server ***
ess Enter to go into Setu
gin to establish the connection, skip steps 1and 2.
pe the value and press Enter, or to confirm a current
p Mode
(Firmware Code: AQ)
ode Window.
seconds. The configuration
nfiguration port number.
g command, where
CoBox-FL User Guide
?