ADUC7036DCPZ-RL Analog Devices Inc, ADUC7036DCPZ-RL Datasheet - Page 28

• Manufacturer Part Number: ADUC7036DCPZ-RL
• Description: SFlash 96k ARM7 Dual 16-Bit ADC LIN I.C.
• Manufacturer: Analog Devices Inc
• Series: MicroConverter® ADuC7xxxr

Specifications of ADUC7036DCPZ-RL

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 20.48MHz
• Connectivity: LIN, SPI, UART/USART
• Peripherals: PSM, Temp Sensor, WDT
• Number Of I /o: 9
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 18 V
• Data Converters: A/D 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 115°C
• Package / Case: 48-VFQFN Exposed Pad, CSP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

ADuC7036
FEE0DAT and FEE1DAT Registers
Name: FEE0DAT and FEE1DAT
Address: 0xFFFF0E0C and 0xFFFF0E8C
Default Value: 0x0000
Access: Read/write access
Function: This 16-bit register contains the data either read from
or to be written to the Flash/EE memory.
Table 15. FEE0MOD and FEE1MOD MMR Bit Designations
Bit
15 to 7
6, 5
4
3
2
1
0
1
The x represents 0 or 1, designating Flash/EE Block 0 or Flash/EE Block 1.
Description
Not used. These bits are reserved for future functionality and should be written as 0 by user code.
Flash/EE security lock bits. These bits must be written as [6:5] = 10 to complete the Flash/EE security protect sequence.
Flash/EE controller command complete interrupt enable.
Set to 1 by user code to enable the Flash/EE controller to generate an interrupt upon completion of a Flash/EE command.
Cleared to disable the generation of a Flash/EE interrupt upon completion of a Flash/EE command.
Flash/EE erase/write enable.
Set by user code to enable the Flash/EE erase and write access via FEExCON.
Cleared by user code to disable the Flash/EE erase and write access via FEExCON.
Reserved. Should be written as 0.
Flash/EE controller abort enable.
Set to 1 by user code to enable the Flash/EE controller abort functionality.
Reserved. Should be written as 0.
1
Rev. C | Page 28 of 132
FEE0MOD and FEE1MOD Registers
Name: FEE0MOD and FEE1MOD
Address: 0xFFFF0E04 and 0xFFFF0E84
Default Value: 0x00
Access: Read/write access
Function: These registers are written by user code to configure
the mode of operation of the Flash/EE memory controllers.