10070D AGILENT TECHNOLOGIES, 10070D Datasheet - Page 24

• Manufacturer Part Number: 10070D
• Description: OSCILLOSCOPE PROBE, 1:1, 20MHZ
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 10070D

• Test Probe Type: Oscilloscope
• Test Probe Functions: Frequency
• For Use With: Infiniium 8000 Series Oscilloscopes
• Lead Free Status / RoHS Status: na

Infiniium Performance Characteristics
Software trigger (InfiniiScan event identification software (Option 009))
Trigger modes
Trigger: digital channels
Threshold range (user defined)
Threshold accuracy*
Predefined thresholds
24
Generic serial
Measurements
Non-monotonic
Runt
Zone qualify
Software triggers on NRZ-encoded data up to 80-bit pattern. Supports multiple clock data
recovery methods including constant frequency, 1
explicit 1
Software triggers on the results of the measurement values. For example, when the “pulse
width” measurement is turned on, InfiniiScan measurement software triggers on a glitch
as narrow as 250 ps.
Software triggers on the non-monotonic edge. The non-monotonic edge is specified by
setting a hysteresis value.
Software triggers on a pulse that crosses one threshold but fails to cross a second
threshold before crossing the first again.
Software triggers on the user-defined zones on screen. Zones can be specified as either
“must intersect” or “must not intersect.” Up to four zones can be defined.
MSO8064A, MSO8104A
±8.0 V in 10-mV increments
±(100 mV + 3% of threshold setting)
TTL=1.4 V, 5.0 V CMOS=2.5 V, 3.3 V CMOS=1.65 V, 2.5 V CMOS=1.25 V, ECL=–1.3 V,
PECL=3.7 V
st
order PLL, 2
(continued)
nd
order PLL (requires N5384A except for the constant frequency).
st
order PLL, 2
nd
order PLL, explicit clock,