10070D AGILENT TECHNOLOGIES, 10070D Datasheet - Page 27

• Manufacturer Part Number: 10070D
• Description: OSCILLOSCOPE PROBE, 1:1, 20MHZ
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 10070D

• Test Probe Type: Oscilloscope
• Test Probe Functions: Frequency
• For Use With: Infiniium 8000 Series Oscilloscopes
• Lead Free Status / RoHS Status: na

Infiniium Performance Characteristics
General characteristics
Temperature
Humidity
Altitude
Vibration
Power
Weight
Dimensions (excluding handle)
Safety
*
1
2
3
4
5
6
7
8
Operating
Non-operating
Operating
Non-operating
Operating
Non-operating
Operating
Non-operating
Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.
Rise time figures are calculated from t r = 0.35/bandwidth.
Magnification is used below 5 mV/div range. Below 5 mV/div, full scale is defined as 40 mV. Full scale is defined as the major attenuator setting above an intermediate
setting. (Major settings 50 Ω: 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 1 MΩ: all of the above plus 2 V).
Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
The dc gain accuracy decreases 0.08% of full scale per degree C from the calibration temperature.
Maximum 2-channel memory depth only available at maximum 2-channel sample rate. Maximum each channel memory depth available at any selectable sample rate.
Valid for vertical ranges > 5 mV/div.
FFT amplitude readings are affected by input amplifier roll-off; DSO8064A and MSO8064A: –3 dB at 600 MHz, with amplitude decreasing as frequency increases above 600
MHz; DSO8104A and MSO8104A: –3 dB at 1 GHz, with amplitude decreasing as frequency increases above 1 GHz.
Noise floor varies with memory depth and with averaging on or off.
DSO8064A, MSO8064A, DSO8104A, MSO8104A
0 °C to + 50 °C
–40 °C to + 70 °C
Up to 95% relative humidity (non-condensing) at +40 °C
Up to 90% relative humidity at +65 °C
Up to 4,600 meters (15,000 feet)
Up to 15,300 meters (50,000 feet)
Random vibration 5-500 Hz, 10 minutes per axis, 0.3 g (rms)
Random vibration 5-500 Hz, 10 minutes per axis, 2.41 g (rms); resonant search 5-500 Hz,
swept sine, 1 octave/minute sweep rate, (0.75 g), 5 minute resonant dwell at 4 resonances
per axis
100-240 VAC, ± 10%, Cat II, 47 to 63 Hz; Max power dissipated: 440 W
Net: 13.9 kg (30.6 lbs.)
Shipping: 16.4 kg (36.1 lbs.)
Height: 216 mm (8.5 in); width: 437 mm (17.19 in); depth: 440 mm (17.34 in)
Meets IEC1010-1 +A2, CSA certified to C22.2 No.1010.1, Self certified to UL 3111
(continued)
27