ISP1506BBS,557 NXP Semiconductors, ISP1506BBS,557 Datasheet - Page 40

• Manufacturer Part Number: ISP1506BBS,557
• Description: RF Transceiver USB2.0 ULPI DDR OTG
• Manufacturer: NXP Semiconductors

Specifications of ISP1506BBS,557

• Operating Supply Voltage: 1.65 V to 3.6 V
• Mounting Style: SMD/SMT
• Package / Case: HVQFN-24
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935278349557 ISP1506BBS

NXP Semiconductors
ISP1506A_ISP1506B_2
Product data sheet
9.10.3 Remote wake-up
The ISP1506 supports peripherals that initiate remote wake-up resume. When placed into
USB suspend, the peripheral link remembers at what speed it was originally operating.
Depending on the original speed, the link follows one of the protocols detailed here. In
Figure
The sequence of events related to a host and a peripheral, both with ISP1506, is as
follows.
1. Both the host and the peripheral are assumed to be in low-power mode.
2. The peripheral begins remote wake-up by re-enabling its clock and setting its
3. The peripheral begins driving K on the bus to signal resume. Note that the peripheral
4. The host recognizes the resume, re-enables its clock and sets its SUSPENDM bit.
5. The host takes over resume driving within 1 ms of detecting the remote wake-up.
6. The peripheral stops driving resume.
7. The peripheral sees the host continuing to drive the resume.
8. The host stops driving resume and the ISP1506 automatically adds the EOP to the
9. Both the host and the peripheral revert to normal operation by writing 00b to
SUSPENDM bit to 1b.
link must assume that LINESTATE is K (01b) while transmitting because it will not
receive any RXCMDs.
end of the resume. The peripheral recognizes the EOP as the end of resume.
OPMODE. If the host or the peripheral was previously in high-speed mode, it must
revert to high-speed before the SE0 of the EOP is completed. This can be achieved
by writing XCVRSELECT[1:0] = 00b and TERMSELECT = 0b after LINESTATE
indicates SE0.
18, timing is not to scale, and not all RXCMD LINESTATE updates are shown.
Rev. 02 — 28 August 2008
ISP1506A; ISP1506B
ULPI HS USB OTG transceiver
© NXP B.V. 2008. All rights reserved.
39 of 79