KS8993F A5 Micrel Inc, KS8993F A5 Datasheet - Page 11

• Manufacturer Part Number: KS8993F A5
• Manufacturer: Micrel Inc

Specifications of KS8993F A5

• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 1.8/2.5/3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII/SNI
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 1.89/3.465V
• Operating Temperature Classification: Commercial
• Lead Free Status / RoHS Status: Not Compliant

KS8993F
August 26, 2004
Pin #
9
10
11
12
13
14
15
16
17
18
Pin Name
MCHS
MCCS
PDD#
ADVFC
P2ANEN
P2SPD
P2DPX
P2FFC
P1FST
P1LCRCD
Type
Ipd
Ipd
Ipu
Ipu
Ipu
Ipd
Ipd
Ipd
Opu
Ipd
Description
KS8993F operating modes, defined as below:
Power Down Detect
In Terminal MC mode (pin MCHS is ‘1’), a high to low transition to this pin
will cause port 1 (fiber) to generate and send out an “Indicate Terminal MC
Condition” OAM frame with the S0 status bit set to ‘1’.
1= advertise the switch’s flow control capability via auto negotiation.
0 = will not advertise the switch’s flow control capability via auto
negotiation.
1 = enable auto negotiation on port 2.
0 = disable auto negotiation on port 2.
1 = Force port 2 to 100BT if P2ANEN = 0.
0 = Force port 2 to 10BT if P2ANEN = 0.
1 = port 2 default to full duplex mode if P2ANEN = 1 and auto negotiation
0 = port 2 default to half duplex mode if P2ANEN = 1 and auto negotiation
1 = always enable (force) port 2 flow control feature.
0 = port 2 flow control feature enable is determined by auto negotiation
1 = normal function
0 = MC in loop back mode, or MC abnormal conditions happen
In MC loop back mode,
(MCHS, MCCS)
1 = normal operation
0 = power down detected
result.
fails. Force port 2 in full duplex mode if P2ANEN = 0.
fails. Force port 2 in half duplex mode if P2ANEN = 0.
(0, 0)
(0, 1)
(1, 0)
(1, 1)
- 11 -
Description
Normal 3 port switch mode (3 MAC + 2 PHY)
Center MC mode (3 MAC + 2 PHY)
Terminal MC mode (2 MAC + 2 PHY)
Terminal MC mode (3 MAC + 2 PHY)
MC mode is disabled.
Port 1 is either Fiber or UTP.
Port 2 is UTP.
Port 3 (MII) is enabled.
MC mode is enabled.
Port 1 is Fiber and has Center MC enabled.
Port 2 is UTP.
Port 3 (MII) is enabled.
MC mode is enabled.
Port 1 is Fiber and has Terminal MC enabled.
Port 2 is UTP.
Port 3 (MII) is disabled.
MC mode is enabled.
Port 1 is Fiber and has Terminal MC enabled.
Port 2 is UTP.
Port 3 (MII) is enabled.
Revision 1.0
Micrel