PIC24FJ64GA106T-I/PT Microchip Technology, PIC24FJ64GA106T-I/PT Datasheet - Page 249

• Manufacturer Part Number: PIC24FJ64GA106T-I/PT
• Description: 16-bit, 16 MIPS, 64KB Flash, 16Kb RAM, 84 I/O, NanoWatt 64 TQFP 10x10x1mm T/R
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ64GA106T-I/PT

• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 64KB (22K x 24)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Processor Series: PIC24FJ256GA110
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: UART, I2C, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Timers: 5
• Operating Supply Voltage: 3.6 V
• Maximum Operating Temperature: - 40 C to + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

REGISTER 25-2:
REGISTER 25-3:
 2010 Microchip Technology Inc.
bit 1-0
Note 1:
bit 23
bit 15
bit 7
Legend:
R = Readable bit
-n = Value when device is unprogrammed
bit 23-16
bit 15
bit 14
bit 13
bit 12-8
bit 7-0
WPEND
WPFP7
R/PO-1
R/PO-1
R/PO-1
—
Implemented in 100-pin devices only; otherwise unimplemented, read as ‘1’.
POSCMD<1:0>: Primary Oscillator Configuration bits
11 = Primary Oscillator disabled
10 = HS Oscillator mode selected
01 = XT Oscillator mode selected
00 = EC Oscillator mode selected
Reserved
WPEND: Segment Write Protection End Page Select bit
1 = Protected code segment upper boundary is at the last page of program memory; lower boundary
0 = Protected code segment lower boundary is at the bottom of program memory (000000h); upper
WPCFG: Configuration Word Code Page Protection Select bit
1 = Last page (at the top of program memory) and Flash Configuration Words are not protected if
0 = Last page and Flash Configuration Words are code-protected if WPEND = 0
WPDIS: Segment Write Protection Disable bit
1 = Segmented code protection disabled
0 = Segmented code protection enabled; protected segment defined by WPEND, WPCFG and
Reserved
WPFP<7:0>: Protected Code Segment Boundary Page bits
Designates the 512-word program code page that is the boundary of the protected code segment,
starting with Page 0 at the bottom of program memory.
If WPEND = 1:
First address of designated code page is the lower boundary of the segment.
If WPEND = 0:
Last address of designated code page is the upper boundary of the segment.
WPCFG
WPFP6
R/PO-1
R/PO-1
R/PO-1
is the code page specified by WPFP<7:0>
boundary is the code page specified by WPFP<7:0>
WPEND = 0
WPFPx Configuration bits
—
CW2: FLASH CONFIGURATION WORD 2 (CONTINUED)
CW3: FLASH CONFIGURATION WORD 3
PO = Program Once bit
WPFP5
R/PO-1
R/PO-1
R/PO-1
WPDIS
—
PIC24FJ256GA110 FAMILY
WPFP4
R/PO-1
R/PO-1
R/PO-1
—
—
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
R/PO-1
R/PO-1
R/PO-1
WPFP3
—
—
WPFP2
R/PO-1
R/PO-1
R/PO-1
—
—
‘0’ = Bit is cleared
WPFP1
R/PO-1
R/PO-1
R/PO-1
—
—
DS39905E-page 249
WPFP0
R/PO-1
R/PO-1
R/PO-1
—
—
bit 16
bit 8
bit 0