ISP1507B1HNTM STEricsson, ISP1507B1HNTM Datasheet - Page 21

• Manufacturer Part Number: ISP1507B1HNTM
• Manufacturer: STEricsson

Specifications of ISP1507B1HNTM

• Lead Free Status / RoHS Status: Compliant

CD00269905
Product data sheet
If a crystal is attached or a clock is driven into the XTAL1 pin, the ISP1507x1 will drive a
60 MHz clock out from the CLOCK pin when DIR deasserts. This is shown as CLOCK in
Figure
The recommended power-up sequence for the link is as follows:
The ULPI interface is ready for use.
1. The link waits for t
2. The link may start to detect DIR status level. If DIR is detected as LOW for three clock
cycles, the link may send a RESET command.
4.
REGUP
Rev. 03 — 26 July 2010
, ignoring all the ULPI pin status.
ISP1507A1; ISP1507B1
ULPI HS USB OTG transceiver
© ST-ERICSSON 2010. All rights reserved.
21 of 78