LPC47M142-NC Standard Microsystems (SMSC), LPC47M142-NC Datasheet - Page 170

• Manufacturer Part Number: LPC47M142-NC
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LPC47M142-NC

• Lead Free Status / RoHS Status: Not Compliant

Note 1: This activate function is satisfied by NHubReset in the HubControl 1 Register defined below.
SMSC DS – LPC47M14X
System Note 1: Current Root Hub device identification is being implemented by using the Vendor ID (VID)
and Product ID (PID) from the hub vendor. Although this is not currently a Windows 2000 or 98 logo
requirement, Microsoft WHQL encourages system vendors to change the VID/PID combination for each of
their motherboards and USB hubs. Using the hub vendor's VID/PID (Default Value of the registers defined
above) combination becomes an issue if, in a future operating system release, WHQL finds a broken
implementation in the industry that must be disallowed. As result, all hubs using the same VID/PID
combination would be disallowed by the operating system. However, if each system vendor creates a
unique VID/PID combination, then only the disallowed implementation would be turned off.
Therefore, it is recommended that each OEM modify / change the following register values, through BIOS,
for each motherboard design by modifying the following registers defined above:
IdVendor_Low
Default=0x24
on VTR POR
IdVendor_High
Default=0x04
on VTR POR
IdProduct_Low
Default=40
on VTR POR
IdProduct_High
Default=01
on VTR POR
BcdDevice_Low
Default=0x00
on VTR POR
BcdDevice_High
Default=0x00
on VTR POR
HubControl_1
Default=0x00
on VTR POR
1)
2)
3)
4)
NAME
IdVendor_Low Default=0x24
IdVendor_High Default=0x04
IdProduct_Low Default=0x40
IdProduct_High Default=0x01
REG INDEX
0xF8-
0xFF
0xF1
0xF2
0xF3
0xF4
0xF5
0xF6
0xF7
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Bit[7:0] USB Vendor ID (assigned by USB), low byte
Default reset to SMSC ID
Bit[7:0] USB Vendor ID (assigned by USB), high byte
Default reset to SMSC ID
Bit[7:0] USB Product ID (assigned by manufacturer), low
byte
Default reset to SMSC silicon ID
Bit[7:0] USB Product ID (assigned by manufacturer),
high byte
Default reset to SMSC silicon ID
Bit[7:0] USB Device Release Number (in binary coded
decimal), low byte
Default set to SMSC silicon revision
Bit[7:0] USB Device Release Number (in binary coded
decimal), high byte
Default set to SMSC silicon revision
Bit[0] GangedPWR
Bit[1:4] Reserved
Bit[5:6] Strp[0:1]
Bit[7] NhubReset
Note: For a detailed description of HubControl_1 bits
see Table 76 below.
Reserved – read as ‘0’
Page 170
DEFINITION
NOTES
System
System
System
System
System
System
Note 1
Note 1
Note 1
Note 1
Note 1
Note 1
Rev. 03/19/2001