PNX1700EH/G,557 Trident Microsystems, Inc., PNX1700EH/G,557 Datasheet - Page 98

• Manufacturer Part Number: PNX1700EH/G,557
• Manufacturer: Trident Microsystems, Inc.

Specifications of PNX1700EH/G,557

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Philips Semiconductors
Volume 1 of 1
8. Audio processing and Input/Output
PNX17XX_SER_1
Preliminary data sheet
8.1 Audio Processing
8.2 Audio Inputs and Outputs
The function of VDO_AUX is programmed using the QVCP capability to combine
alpha or chroma-keying information during blending. For example, chroma keys in a
graphics plane could be used to drive VDO_AUX. For another example, a threshold
value for an alpha value of a graphics plane could be used to indicate whether a pixel
is more than 80% video.
All audio processing in PNX17xx Series is performed in software on the TM5250.
This includes decoding of audio from compressed formats, sample rate conversion,
mixing and special effects processing. There is sufficient performance, if required, to
transcode received audio to multi-channel compressed audio sent over S/PDIF to an
attached receiver.
The PNX17xx Series has several Audio Input/Output facilities:
•
•
•
•
PNX17xx Series Audio In can capture up to 8 stereo audio inputs with up to 32-
bit/sample precision at sample rates up to 96 kHz. Both Audio In and Audio Out
support most A/D converter serial protocols, including I
internally or externally generated. The internal generator is programmable with
sub one Hertz sampling rate accuracy. Audio In also includes a raw mode which
allows the capture of any quantity of bits out of the programmable frame (up to
512 bits per frame). The word strobe (AI_WS pin) is also captured and stored into
memory.
PNX17xx Series Audio Out can generate up to 8 channels of audio, and directly
drives up to 4 external stereo I
bit/sample precision at sample rates up to 96 kHz. The sample rate can be
internally or externally generated. The internal generator is programmable with
sub one Hertz sampling rate accuracy. Audio out does not include a raw mode as
the Audio In module does.
PNX17xx Series supports a SPDIF (Sony Philips Digital Interface) output with
IEC-1937 capabilities. Transmitted data is generated by TM5250 software. This
output port can carry either stereo PCM samples from an internal audio mix, or
one of the originally received compressed audio programs (5.1 channel AC-3,
multi-channel MPEG audio, multi-channel AAC). Sample rate of transmitted
audio is set by software, allowing perfect synchronization to any time reference in
the system.
PNX17xx Series supports a SPDIF input to connect to external sources, such as
a DVD player. The incoming data is timestamped and written to unified system
memory. Data interpretation and sample rate recovery is achieved by software on
the TM5250. The audio data received can be in a variety of formats, such as
stereo PCM data, 5.1 channel AC-3 data per IEC-1937 or other. Software
Rev. 1 — 17 March 2006
2
S or similar D/A converters. It supports up to 32-
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
PNX17xx Series
2
S. Sample rate is
Chapter 2: Overview
2-17