SCAN926260TUF National Semiconductor, SCAN926260TUF Datasheet - Page 17

• Manufacturer Part Number: SCAN926260TUF
• Manufacturer: National Semiconductor

Specifications of SCAN926260TUF

• Number Of Elements: 6
• Input Type: CMOS/TTL
• Operating Supply Voltage (typ): 3.3V
• Differential Input High Threshold Voltage: 50mV
• Diff. Input Low Threshold Volt: -50mV
• Output Type: Deserializer
• Transmission Data Rate: 660Mbps
• Power Dissipation: 3.7W
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 196
• Package Type: LBGA
• Number Of Receivers: 1
• Number Of Drivers: 10
• Lead Free Status / RoHS Status: Not Compliant

TMS
TRST
TDI
TCK
TDO
BISTMODE_REQ
BIST_SEL[0:2]
BIST_ACT
N/C
Pin Name
3.3V CMOS
3.3V CMOS
3.3V CMOS
3.3V CMOS
3.3V CMOS
3.3V CMOS
3.3V CMOS
3.3V CMOS
Output
Type
Input
Input
Input
Input
Input
Input
Input
C1
C2
D1
D2
D3
B10
C14, D8, D14
K11
B13, C13
Pins
17
Test Mode Select input to support IEEE 1149.1. There is a weak
internal pull-up on TMS that defaults TRST, TDI, TCK and TDO
to be inactive. However, in noisy environments, pulling TMS high
ensures the JTAG test access port (TAP) is never activated.
Test Reset Input to support IEEE 1149.1. There is a weak internal
pull-up on this pin.
Test Data Input to support IEEE 1149.1. There is a weak internal
pull-up on this pin.
Test Clock to support IEEE 1149.1
Test Data Output to support IEEE 1149.1.
BIST Alone Error Reporting Mode Select Input.
These pins control which channels are active for the BIST Alone
operating mode. The BIST Alone Mode Selection Table describes
their function. There are internal pull-ups that default all
BIST_SEL[0:2] to high, which is the idle state for all channels in
the BIST Alone mode.
A high on this pin activates the BIST Alone operating mode. There
is a weak internal pull-down that should default the BIST_ACT to
de-activate the BIST Alone operating mode. In a noisy operating
environment, it is recommended that an external pull down be
used to ensure that BIST_ACT stays in the low state.
Unused solder ball location. Do not connect.
Description
www.national.com