750-841 WAGO, 750-841 Datasheet - Page 81

no-image

750-841

Manufacturer Part Number
750-841
Description
CONTR.ETHERNET TCP/IP 10/100MBIT
Manufacturer
WAGO
Datasheet

Specifications of 750-841

Rohs Compliant
YES
No. Of Digital Inputs
10
No. Of Digital Outputs
10
3.1.7.2.5 Testing the Function of the Fieldbus Node
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
11. Click on the Stop button, and then on the Exit button to close the BootP
1. To test the controller’s newly assigned I/P address, start a DOS window by
10. Now it is important to restart the controller by resetting the hardware. To
2. In the DOS window, enter the command: "ping " followed by the PFC’s IP
3. When the Enter key has been pressed, your PC will receive a query from the
Fig. 3.1-13 Dialog Window of the WAGO BootP Server with Messages
Fig. 3.1-14: Example for the Function test of a Fieldbus Node
protocol. A series of messages will be displayed in the BootP server
message window. The error messages indicate that some services (e.g. port
67, port 68) in the operating system have not been defined. DO NOT BE
ALARMED, THIS IS THE CORRECT OPERATION FOR THIS
EXAMPLE.
do this, cycle power to the fieldbus controller for approximately 2 seconds
or press the operating mode switch down, which is located behind the
configuration interface flap on the front of the controller.
Following this, you should see a reply from the PFC stating that the IP
address has been accepted (no errors). The IP address is now temporarily
stored in the controller. Do not cycle power on the controller until the
BootP protocol has been disabled in the PFC.
Server .
clicking on the Start menu item Programs/MS-DOS Prompt
address in the following format:
ping [space] XXXX . XXXX . XXXX . XXXX (=IP address).
Example: ping 10.1.254.202
controller, which will then be displayed in the DOS window.
If the error message: "Timeout" appears, please compare your entries again
to the allocated IP address and check all connections. Verify that the
TXD/RXD LEDs flash when the ping command is issued.
Fieldbus Controller 750-841
Fieldbus Controller
P012910d
P012909d
• 73

Related parts for 750-841