750-841 WAGO, 750-841 Datasheet - Page 95

• Manufacturer Part Number: 750-841
• Description: CONTR.ETHERNET TCP/IP 10/100MBIT
• Manufacturer: WAGO

Specifications of 750-841

• Rohs Compliant: YES
• No. Of Digital Inputs: 10
• No. Of Digital Outputs: 10

3.1.8.4 IEC 61131-3-Program transfer
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
1. If you choose the RS232 driver, verify that the Communication parameters
2. If you choose the TCP/IP driver, verify that the Communication parameters
dialog window contains the following setup data: Baudrate=19200,
Parity=Even, Stop bits=1, Motorola byteorder=No.
dialog window contains the following setup data: Port=2455, Motorola
byteorder=No. Additionally, verify that the entered IP address is correct.
Note
When choosing the driver, make sure the communication parameters are
correctly set and match your controller.
More information
For information on the installation of the communication drivers, as well as
details regarding the use of the software, please refer to the WAGO-I/O-PRO
CAA manual. An electronic copy of this manual can be found on WAGO’s
web site:
•
•
Transferring an IEC 61131-3 application program from your PC to the PFC
can be done in two different ways:
The Communication parameters dialog window is displayed through the
program menu item Online and then Communication parameters.
via the serial RS232 interface
via the fieldbus with TCP/IP.
www.wago.com
Fieldbus Controller 750-841
Fieldbus Controller
• 87