750-841 WAGO, 750-841 Datasheet - Page 85

• Manufacturer Part Number: 750-841
• Description: CONTR.ETHERNET TCP/IP 10/100MBIT
• Manufacturer: WAGO

Specifications of 750-841

• Rohs Compliant: YES
• No. Of Digital Inputs: 10
• No. Of Digital Outputs: 10

3.1.8 Programming the PFC with WAGO-I/O-PRO CAA
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
1. To start the WAGO-I/O-PRO CAA, click the Start menu item
2. Choose WAGO, 750-841, Ethernet 10/100Mbps controller from the pull
3. You can now create a new project in WAGO-I/O-PRO CAA via its menu
4. To access I/O modules of your node, the module configuration must first be
Note
To perform IEC 61131-3 programming in the 750-841 PFC, the WAGO-I/O-
PRO port must be enabled. Enable and Disabling of this port is done with a
checkbox in the “Port configuration” web page.
More information
For a detailed description of how to use the software, please refer to the
WAGO-I/O-PRO CAA manual. An electronic copy of this manual can be
found on WAGO’s web site:
The WAGO 750-841 Programmable Fieldbus Controller (PFC) combines the
functionality of an ETHERNET fieldbus coupler with the functionality of a
Programmable Logic Controller (PLC). When the PFC is used as a PLC, all
or some of its I/O modules can be control locally with the use of WAGO-I/O-
PRO CAA. WAGO-I/O-PRO CAA is an IEC 61131-3 programming tool that
is used to program and configure the 750-841 PFC. I/O modules which are
not controlled locally (i.e., not controlled as a PLC), can be controlled
remotely through the 10/100 Mbps ETHERNET Fieldbus port.
The purpose of this section is not to provide a comprehensive lesson on
WAGO-I/O-PRO CAA programming. Instead, it highlights important
programming and configuration notes of the IEC 61131-3 program when it is
used with the 750-841 PFC.
Programs/CoDeSys for Automation Alliance/CoDeSys V2.3/ CoDeSys
V2.3 .
A dialog window will open. Select the target system for programming.
down list and click the OK button.
item File/New. A dialog window will prompt you to select the
programming language (i.e., IL, LD, FBD, SFC, etc.).
mapped in the file "EA-config.xml". This file defines which system may
have write access to each particular I/O module (i.e., the IEC 61131-3
program, MODBUS TCP Fieldbus, or Ethernet IP Fieldbus).
This file can be generated, as described in the following, by the
configuration with the WAGO I/O PRO CAA Configurator.
www.wago.com
Fieldbus Controller 750-841
Fieldbus Controller
• 77